OPB696 Datasheet PDF - OPTEK
| Part Number | OPB696 | |
| Description | Optical Flag Switch | |
| Manufacturers | OPTEK | |
| Logo |  |
|
|
There is a preview and OPB696 download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
Photologic® Optical Flag Switch
OPB685, OPB685-3, OPB686, OPB687, OPB688
OPB695, OPB696, OPB697, OPB698 Series
Features:
Photologic® output
Four output options
Mechanical switch replacement
Printed circuit board mounting (OPB685 Series)
2.5mm, 3-pin connector mates with Molex connector 5051 series
housing and 4809 series terminal for OPB695 Series
OPB685
Product Photo Here
OPB695
Description:
Each OPB685 and OPB695 series flag switch consists of an infrared emitting diode and a monolithic integrated
circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger. A lever arm actuated flag interrupts
the light beam, which switches the output between states that can readily drive logic gates.
The OPB695 series is designed to easily snap mount into a 0.037” ± 0.001” (0.940 mm ± 0.025 mm) thick material
with a rectangular opening of 0.320” ± 0.003” x 0.472” (8.13 mm x 11.99 mm) minimum. Insertion into the
punched side of metal is recommended.
Devices in these series feature TTL/LSTTL compatible logic level output that can drive up to 10 TTL loads over a
voltage range from 4.5 V to 16 V.
Customized lever arms and spring torques can be designed for specific applications for each of the devices.
Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed indication (tachometer)
Mechanical limit indication
Edge sensing
Part LED Peak
Number Wavelength
OPB685
OPB686
OPB687
OPB688
OPB695AZ
OPB695BZ
OPB695CZ
OPB696AZ
OPB696BZ
890 nm
OPB696CZ
OPB697AZ
OPB697BZ
OPB697CZ
OPB698AZ
OPB698BZ
OPB698CZ
Ordering Information
Sensor Photologic®
Flag Travel
Degrees Max
10K Pull-Up
Open Collector
Inv. 10K Pull-Up
59°
Inv. Open Collector
10K Pull-Up
Open Collector
Inv. 10K Pull-Up
70°
Inv. Open Collector
Lead Length /
Spacing or Connector
0.100" / 0.275"
Mates with
3 Pin—Molex
5051 (22-01-1032)
Housing
& 4809 (08-70-0069)
Terminals
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 03/15
Page 1 of 5
|
| |
 
Photologic® Optical Flag Switch
OPB685, OPB685-3, OPB686, OPB687, OPB688
OPB695, OPB696, OPB697, OPB698 Series
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Output Photologic® Sensor (continued)
IF(+)
LED Positive-Going Threshold Current
OPB685-688
IF(+)/IF(-) Hysteresis
OPB685/688
0.1
1.0
1.8 10
1.2 1.6
mA VCC = 5 V
mA VCC = 5 V
trtf Rise Time, Fall Time
- 30 -
Propagation Delay Low-High & High-
Low:
Buffer, 10k Pull-Up
tPLHtPHL Buffer, Open-Collector
OPB685
-
1 (LH)
-
OPB686
-
2 (HL)
-
Inverter, 10k Pull-Up
Inverter, Open-Collector
OPB687
OPB688
-
-
2 (LH)
1( HL)
-
-
Notes:
(1) Test requires lever arm in “blocked” posi on.
(2) Test requires lever arm in “unblocked” posi on
ns
µs
µs
VCC = 5 V, IF = 0 or 10 mA
RL = 300 Ω, DC = 50%
f = 10 kHz
µs
µs
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 03/15
Page 5 of 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OPB696 electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ OPB696.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| OPB695 | The function is Optical Flag Switch. OPTEK | |
| OPB696 | The function is Optical Flag Switch. OPTEK | |
| OPB697 | The function is Optical Flag Switch. OPTEK | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
OPB6
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||