|
|
PDF EL5163 Data sheet ( Hoja de datos )
| Número de pieza | EL5163 | |
| Descripción | 500MHz Low Power Current Feedback Amplifiers | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL5163 (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
DATASHEET
500MHz Low Power Current Feedback Amplifiers with
Enable
EL5162, EL5163, EL5262,
EL5263, EL5362
The EL5162, EL5163, EL5262, EL5263 and EL5362 are
current feedback amplifiers with a bandwidth of 500MHz. This
makes these amplifiers ideal for today’s high speed video and
monitor applications.
With a supply current of just 1.5mA per amplifier and the
ability to run from a single supply voltage from 5V to 12V,
these amplifiers are also ideal for handheld, portable or
battery-powered equipment.
The EL5162, EL5262 and EL5362 also incorporate an enable
and disable function to reduce the supply current to 14µA
typical per amplifier. Allowing the CE pin to float or applying a
low logic level enables the amplifier.
The EL5162 is available in 6 Ld SOT-23 and 8 Ld SOIC
packages, the EL5163 in 5 Ld SOT-23 and SC-70 packages,
the EL5262 in the 10 Ld MSOP package, the EL5263 in 8 Ld
MSOP and SOIC packages, and the EL5362 in 16 Ld SOIC
(0.150”) and QSOP packages. All operate over the industrial
temperature range of -40°C to +85°C.
Features
• 500MHz -3dB bandwidth
• 4000V/µs slew rate (EL5162 and EL5163)
• 1.5mA supply current per amplifier
• Single and dual supply operation, from 5V to 12V supply
span
• Fast enable/disable (EL5162, EL5262 and EL5362 only)
• Available in SOT-23 packages
• Pb-free (RoHS compliant)
• High speed, 1.4GHz product available (EL5166 and EL5167)
• High speed, 4mA, 600MHz product available (EL5164,
EL5165 and EL5364)
Applications
• Battery-powered equipment
• Handheld portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
August 26, 2015
FN7388.13
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2004, 2005, 2007, 2008, 2014, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1 page  
EL5162, EL5163, EL5262, EL5263, EL5362
Electrical Specifications VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 400Ω for AV = 2, RL = 150Ω, CE = 0V, TA = +25°C unless
otherwise specified. Boldface limits apply across the operating temperature range, -40°C to +85°C. (Continued)
PARAMETER
DESCRIPTION
TEST CONDITIONS
MIN MAX
(Note 6) TYP (Note 6) UNIT
OUTPUT CHARACTERISTICS
VO
IOUT
SUPPLY
Output Voltage Swing
Output Current
RL = 150Ω to GND
RL = 1kΩ to GND
RL = 10Ω to GND
±3.35
±3.75
60
±3.6
±3.9
100
±3.75
±4.15
V
V
mA
ISON
Supply Current - Enabled, per Amplifier No load, VIN = 0V
1.3 1.5 2.0 mA
ISOFF-
ISOFF+
Supply Current - Disabled, per Amplifier No load, VIN = 0V (EL5162, EL5262, EL5362
-25
-14
0
µA
Only)
0 10 +25 µA
PSRR
Power Supply Rejection Ratio
DC, VS = ±4.75V to ±5.25V
65 76
dB
-IPSR
- Input Current Power Supply Rejection
DC, VS = ±4.75V to ±5.25V
-0.5 0.1 +0.5 µA/V
ENABLE (EL5162, EL5262, EL5362 ONLY)
tEN Enable Time
380
tDIS Disable Time
800
IIHCE
CE Pin Input High Current
CE = VS+
1 5 25
IILCE
CE Pin Input Low Current
CE = (VS+) -5V
-1 0 +1
VIHCE
CE Input High Voltage for Power-down
(VS+) - 1
VILCE
CE Input Low Voltage for Power-up
(VS+) - 3
NOTES:
5. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz.
6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
ns
ns
µA
µA
V
V
Submit Document Feedback
5
FN7388.13
August 26, 2015
5 Page 
EL5162, EL5163, EL5262, EL5263, EL5362
Package Outline Drawing
M8.15E
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
Rev 0, 08/09
4
4.90 ± 0.10
A
DETAIL "A"
0.22 ± 0.03
PIN NO.1
ID MARK
5
1.27
B
6.0 ± 0.20
3.90 ± 0.10
4
TOP VIEW
0.43 ± 0.076
0.25 M C A B
(0.35) x 45°
4° ± 4°
SIDE VIEW “B”
1.75 MAX
0.175 ± 0.075
SIDE VIEW “A
(1.27)
(0.60)
(1.50)
(5.40)
TYPICAL RECOMMENDED LAND PATTERN
1.45 ± 0.1
DETAIL "A"
0.25
GAUGE PLANE C
SEATING PLANE
0.10 C
0.63 ±0.23
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
4. Dimension does not include interlead flash or protrusions.
Interlead flash or protrusions shall not exceed 0.25mm per side.
5. The pin #1 identifier may be either a mold or mark feature.
6. Reference to JEDEC MS-012.
Submit Document Feedback 11
FN7388.13
August 26, 2015
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet EL5163.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL5160 | (EL5160 - EL5360) 200MHz Low-Power Current Feedback Amplifiers | Intersil Corporation |
| EL5161 | (EL5160 - EL5360) 200MHz Low-Power Current Feedback Amplifiers | Intersil Corporation |
| EL5162 | 500MHz Low Power Current Feedback Amplifiers | Intersil Corporation |
| EL5163 | 500MHz Low Power Current Feedback Amplifiers | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |