Datasheet.kr   

BAT42 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 BAT42
기능 Small Signal Schottky Diode
제조업체 Vishay
로고 Vishay 로고 



전체 4 페이지

		

No Preview Available !

BAT42 데이터시트, 핀배열, 회로
www.vishay.com
BAT42, BAT43
Vishay Semiconductors
Small Signal Schottky Diode
MECHANICAL DATA
Case: DO-35
Weight: approx. 125 mg
Cathode band color: black
Packaging codes/options:
TR/10K per 13" reel (52 mm tape), 50K/box
TAP/10K per ammo tape (52 mm tape), 50K/box
FEATURES
• For general purpose applications
• These diodes feature very low turn-on voltage
and fast guard ring against excessive voltage,
such as electrostatic discharges
• These diodes are also available in the SOD-123
case with the type designations BAT42W-V to
BAT43W-V and in MiniMELF SOD-80 case with
the type designations LL42 to LL43
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PARTS TABLE
PART
BAT42
BAT43
ORDERING CODE
BAT42-TR or BAT42-TAP
BAT43-TR or BAT43-TAP
INTERNAL CONSTRUCTION
Single diode
Single diode
TYPE MARKING
BAT42
BAT43
REMARKS
Tape and reel/ammopack
Tape and reel/ammopack
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Repetitive peak reverse voltage
Forward continuous current (1)
Repetitive peak forward current (1)
Surge forward current (1)
Power dissipation (1)
tp < 1 s, < 0.5
tp < 10 ms
Tamb = 65 °C
VRRM
IF
IFRM
IFSM
Ptot
Note
(1) Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature
VALUE
30
200
500
4
200
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Thermal resistance junction to ambient air (1)
Junction temperature
Ambient operating temperature range
Storage temperature range
RthJA
Tj
Tamb
Tstg
Note
(1) Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature
VALUE
300
125
- 65 to + 125
- 65 to + 150
UNIT
V
mA
mA
A
mW
UNIT
K/W
°C
°C
°C
Rev. 1.7, 06-May-13
1 Document Number: 85660
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




BAT42 pdf, 반도체, 판매, 대치품
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

4페이지













구       성총 4 페이지
다운로드[ BAT42.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
BAT400

0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Diodes Incorporated
Diodes Incorporated
BAT400D

0.5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Diodes Incorporated
Diodes Incorporated

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵