Datasheet.kr   

1S1832 데이터시트 PDF




Toshiba Semiconductor에서 제조한 전자 부품 1S1832은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 1S1832 자료 제공

부품번호 1S1832 기능
기능 Silicon Diffused Type Rectifier
제조업체 Toshiba Semiconductor
로고 Toshiba Semiconductor 로고


1S1832 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

1S1832 데이터시트, 핀배열, 회로
TOSHIBA Rectifier Silicon Diffused Type
1S1832
High-Speed Rectifier Applications (fast recovery)
Average Forward Current: IF (AV) = 0.7 A (Ta = 50°C)
Repetitive Peak Reverse Voltage: VRRM = 1800 V
Reverse Recovery Time: trr = 6.0 µs
Plastic Mold Type
1S1832
Unit: mm
Maximum Ratings (Ta = 25°C)
Characteristics
Repetitive peak reverse voltage
Reverse voltage (DC)
Average forward current (Ta = 50°C)
Peak one cycle surge forward current
(non-repetitive)
Junction temperature
Storage temperature range
Symbol
VRRM
VR
IF (AV)
IFSM
Tj
Tstg
Rating
1800
1500
0.7
60 (50 Hz)
66 (60 Hz)
40 to 125
40 to 125
Electrical Characteristics (Ta = 25°C)
Unit
V
V
A
A
°C
°C
JEDEC
DO-15
JEITA
SC-39
TOSHIBA
3-3B1A
Weight: 0.42 g (typ.)
Characteristics
Symbol
Test Condition
Min Typ. Max Unit
Peak forward voltage
Repetitive peak reverse current
Reverse recovery time
VFM
IRRM (1)
IRRM (2)
trr
IFM = 1.5 A
VRRM = 1500 V
VRRM = 1500 V, Tj = 125°C
IF = 20 mA, IR = 1 mA
⎯ ⎯ 2.0 V
⎯ ⎯ 10
µA
⎯ ⎯ 400
⎯ ⎯ 6.0 µs
Note 1: Lead diameter not controlled in this zone to allow for flash, lead finish build-up and minor irregularities other
than slugs.
Note 2: Soldering: 5 mm is the minimum to be kept between the case and the soldered part.
Note 3: Lead bending: 5 mm is the minimum to be kept from the case when bending lead wires.
Marking
Part No. (or abbreviation code)
Lot No.
32 A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
Abbreviation Code
32
Part No.
1S1832
1 2004-07-07




1S1832 pdf, 반도체, 판매, 대치품
1S1832
RESTRICTIONS ON PRODUCT USE
030619EAA
The information contained herein is subject to change without notice.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
4 2004-07-07

4페이지












구       성 총 4 페이지수
다운로드[ 1S1832.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
1S1830

Silicon Diffused Type Rectifier

Toshiba Semiconductor
Toshiba Semiconductor
1S1830

AXIAL LEADED SILICON RECTIFIER DIODES

SUNMATE
SUNMATE

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵