|
|
PDF B116HAN03.1 Data sheet ( Hoja de datos )
| Número de pieza | B116HAN03.1 | |
| Descripción | FHD 16:9 Color TFT-LCD | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B116HAN03.1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( v ) Final Specifications
Module
11.6”(11.58”) FHD 16:9 Color TFT-LCD
with LED Backlight design
Model Name B116HAN03.1
Note ( ) LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved
by
Date
Note: This Specification is subject to
change without notice.
Kevin KH Shen
07/26/2013
Prepared by
Michael WJ Sun
07/26/2013
MPBU Marketing Division
AU Optronics corporation
B116HAN03.1 Document Version : 1.1
1 of 33
1 page  
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from
input connector.
3) Wipe off water drop immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other
soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or
bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and
insure human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any
directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not
to rotate nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC
Bezel, for example), do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD
module. The LCD module should be supplied by power complied with
requirements of Limited Power Source (IEC60950 or UL1950), or be applied
exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent
electric shock, DO NOT TOUCH the electrode parts, cables, connectors and
LED circuit part of TFT module that a LED light bar build in as a light source of
back light unit. It can prevent electrostatic breakdown.
B116HAN03.1 Document Version : 1.1
5 of 33
5 Page 
Product Specification
AU OPTRONICS CORPORATION
Note 9. Definition of viewing angle
≧Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range
is broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and
low (down). The measurement direction is typically perpendicular to the display surface with
the screen rotated about its center to develop the desired measurement viewing angle.
B116HAN03.1 Document Version : 1.1
11 of 33
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet B116HAN03.1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B116HAN03.0 | 16:9 Color TFT-LCD | AUO |
| B116HAN03.1 | FHD 16:9 Color TFT-LCD | AUO |
| B116HAN03.2 | 16:9 Color TFT-LCD | AUO |
| B116HAN03.3 | 16:9 Color TFT-LCD | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |