Datasheet.kr   

B116HAN03.3 PDF 데이터시트 ( Data , Function )

부품번호 B116HAN03.3 기능
기능 16:9 Color TFT-LCD
제조업체 AUO
로고 AUO 로고 



전체 30 페이지

		

No Preview Available !

B116HAN03.3 데이터시트, 핀배열, 회로
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
(V ) Final Specifications
Module
Model Name
11.6”(11.58 ”) 16:9 Color TFT-LCD
with LED Backlight design
B116HAN03.3 (H/W:0A )
Note ( ) LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Kay Liu
2014/09/12
Prepared by
Date
Doremi Fang
2014/09/12
DMPBU Marketing Division
AU Optronics corporation
B116HAN03.3 Document Version : 1.1
1 of 32




B116HAN03.3 pdf, 반도체, 판매, 대치품
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
10)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
11)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
12)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
B116HAN03.3 Document Version : 1.1
4 of 32

4페이지










B116HAN03.3 전자부품, 판매, 대치품
Product Specification
AU OPTRONICS CORPORATION
Note 1: 5 points position (Ref: Active area)
W /4
W /4
W
W /4
W /4
H /4
H /4
H
H /4
H /4
12
3
45
Note 2: 13 points position (Ref: Active area)
W /4
10
W /4
W
W /4
W /4
10
10
H /4
1
4
23
5
H /4
H
H /4
6
9
78
10
H /4 11 12 13
10
Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by the
minimum test point luminance
δW5 =
Maximum Brightness of five points
Minimum Brightness of five points
δW13 =
Maximum Brightness of thirteen points
Minimum Brightness of thirteen points
B116HAN03.3 Document Version : 1.1
7 of 32

7페이지



구       성총 30 페이지
다운로드[ B116HAN03.3.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
B116HAN03.0

16:9 Color TFT-LCD

AUO
AUO
B116HAN03.1

FHD 16:9 Color TFT-LCD

AUO
AUO

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵