|
|
PDF LQ10-104Y Data sheet ( Hoja de datos )
| Número de pieza | LQ10-104Y | |
| Descripción | HIGH VOLTAGE FILTER CAPACITORS | |
| Fabricantes | Plasti Ccapacitors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LQ10-104Y (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Page 1 of 3
LQTYPE
HIGH VOLTAGE FILTER CAPACITORS
65ºC PHENOLIC CAP - PLASTIC FILM DC FILTER
[Products | Terms & Conditions | Sales Reps | Tech. Bulletins]
[Links | E-Mail | Home]
The data contained herein shows only a PARTIAL LISTING of items available for this product line and it gives only a
CONDENSED VERSION of the applicable specifications and characteristics. Request our complete catalog for full
information!
Type LQ capacitors are designed for DC application such as filtering, bypass and coupling
application. Type LQ capacitors are offered with internal construction variations designed to meet
various circuit conditions. The following suffix letters identify these constructions.
Suffix "V" is extended foil (non-inductively wound), providing soldered contacts thruout. These
capacitors are useful when used as a filter in a power supply which has a very low current output, or
if the capacitor must supply high surge currents. They are oil impregnated, and epoxy filled.
Suffix "Y" is the standard inserted tab construction for filter and bypass
applications and are oil impregnated, and epoxy filled.
The Case is a black phenolic shell. The epoxy end fill is heat resistant and
provides a positive seal to the phenolic shell.
Impregnant used for suffix types "V" and "Y" is a highly refined, purified and
inhibited combination of natural mineral oil and a synthetic oil, the flash point is
greater than 145ºC when measured per method 110.3.4 of specification VV-L-
791.
Mounting Position all types LQ capacitors will operate satisfactorily in any
mounting position.
Terminals are Copperweld leads. The wire gauge and length used are functions
of the case size; minimum of 1-3/4 inch length, #20 or #22 wire.
AC Applications the phenolic shell is a useful housing for low cost alternating
current applications. By the judicious use f available low loss dielectrics, the
frequency range can be extended to 30 megahertz. Call us at (773) 489-2233 or
send us an E-Mail for recommendations.
Temperature Range -20°C to 65°C with nameplate voltage applied.
Test Voltage Terminal to terminal is 150% rated voltage for one minute without a
permanent breakdown.
Capacitance Tolerance Standard capacitance tolerance is ±10%. Standard
tolerances not marked.
Life type LQ capacitors are designed for continuous operation at 65°C for 10,000 hours.
Dielectric Resistance is given in the "R vs. T" graph. Measurement can be made with nameplate voltage. Capacitance
values under 1 mfd. need not exceed two times the graph value per mfd. at any temperature.
Humidity Resistance Test will meet requirements of EIA RS 164.
Part Number
1000 VDCW
Cap. Dia.
MFD. ±1/16
SUFFIX "V" Extended foil oil impregnated.
1500 VDCW
Lg. +1/8
-1/16
Part Number
Cap.
MFD.
Dia. Lg. +1/8
±1/16 -1/16
Part Number
2000 VDCW
Cap. Dia.
MFD. ±1/16
Lg. +1/8
-1/16
http://www.plasticcapacitors.com/typelq.html
6/4/2010
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet LQ10-104Y.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LQ10-104V | HIGH VOLTAGE FILTER CAPACITORS | Plasti Ccapacitors |
| LQ10-104Y | HIGH VOLTAGE FILTER CAPACITORS | Plasti Ccapacitors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |