Datasheet.kr   

LQ30-504Y 데이터시트 PDF




Plasti Ccapacitors에서 제조한 전자 부품 LQ30-504Y은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 LQ30-504Y 자료 제공

부품번호 LQ30-504Y 기능
기능 HIGH VOLTAGE FILTER CAPACITORS
제조업체 Plasti Ccapacitors
로고 Plasti Ccapacitors 로고


LQ30-504Y 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 3 페이지수

미리보기를 사용할 수 없습니다

LQ30-504Y 데이터시트, 핀배열, 회로
Page 1 of 3
LQTYPE
HIGH VOLTAGE FILTER CAPACITORS
65ºC PHENOLIC CAP - PLASTIC FILM DC FILTER
[Products | Terms & Conditions | Sales Reps | Tech. Bulletins]
[Links | E-Mail | Home]
The data contained herein shows only a PARTIAL LISTING of items available for this product line and it gives only a
CONDENSED VERSION of the applicable specifications and characteristics. Request our complete catalog for full
information!
Type LQ capacitors are designed for DC application such as filtering, bypass and coupling
application. Type LQ capacitors are offered with internal construction variations designed to meet
various circuit conditions. The following suffix letters identify these constructions.
Suffix "V" is extended foil (non-inductively wound), providing soldered contacts thruout. These
capacitors are useful when used as a filter in a power supply which has a very low current output, or
if the capacitor must supply high surge currents. They are oil impregnated, and epoxy filled.
Suffix "Y" is the standard inserted tab construction for filter and bypass
applications and are oil impregnated, and epoxy filled.
The Case is a black phenolic shell. The epoxy end fill is heat resistant and
provides a positive seal to the phenolic shell.
Impregnant used for suffix types "V" and "Y" is a highly refined, purified and
inhibited combination of natural mineral oil and a synthetic oil, the flash point is
greater than 145ºC when measured per method 110.3.4 of specification VV-L-
791.
Mounting Position all types LQ capacitors will operate satisfactorily in any
mounting position.
Terminals are Copperweld leads. The wire gauge and length used are functions
of the case size; minimum of 1-3/4 inch length, #20 or #22 wire.
AC Applications the phenolic shell is a useful housing for low cost alternating
current applications. By the judicious use f available low loss dielectrics, the
frequency range can be extended to 30 megahertz. Call us at (773) 489-2233 or
send us an E-Mail for recommendations.
Temperature Range -20°C to 65°C with nameplate voltage applied.
Test Voltage Terminal to terminal is 150% rated voltage for one minute without a
permanent breakdown.
Capacitance Tolerance Standard capacitance tolerance is ±10%. Standard
tolerances not marked.
Life type LQ capacitors are designed for continuous operation at 65°C for 10,000 hours.
Dielectric Resistance is given in the "R vs. T" graph. Measurement can be made with nameplate voltage. Capacitance
values under 1 mfd. need not exceed two times the graph value per mfd. at any temperature.
Humidity Resistance Test will meet requirements of EIA RS 164.
Part Number
1000 VDCW
Cap. Dia.
MFD. ±1/16
SUFFIX "V" Extended foil oil impregnated.
1500 VDCW
Lg. +1/8
-1/16
Part Number
Cap.
MFD.
Dia. Lg. +1/8
±1/16 -1/16
Part Number
2000 VDCW
Cap. Dia.
MFD. ±1/16
Lg. +1/8
-1/16
http://www.plasticcapacitors.com/typelq.html
6/4/2010





구       성 총 3 페이지수
다운로드[ LQ30-504Y.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LQ30-504V

HIGH VOLTAGE FILTER CAPACITORS

Plasti Ccapacitors
Plasti Ccapacitors
LQ30-504Y

HIGH VOLTAGE FILTER CAPACITORS

Plasti Ccapacitors
Plasti Ccapacitors

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵