|
|
PDF STK404-140S Data sheet ( Hoja de datos )
| Número de pieza | STK404-140S | |
| Descripción | One-Channel Class AB Audio Power Amplifier IC | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STK404-140S (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : ENN7731
SANYO Semiconductors
DATA SHEET
Thick-Film Hybrid IC
STK404-140S One-Channel Class AB Audio
Power Amplifier IC 120W
Overview
The STK404-000S series products are audio power amplifier hybrid ICs that consist of optimally-designed discrete
component power amplifier circuits that have been miniaturized using SANYO’s unique insulated metal substrate
technology (IMST). The adoption of a newly-developed low thermal resistance substrate allows this series of devices
to be provided in miniature packages significantly more compact than earlier Sanyo products with similar
specifications.
Features
• Series of pin compatible power amplifiers ranging from 45W to 180W (10%/1kHz) devices. The same printed
circuit board can be used depending on the output power grade.
• Miniature packages
— 30W to 40W (THD=0.4%, f=20Hz to 20kHz); 44.0mm × 25.6mm × 8.5mm *
— 50W to 80W (THD=0.4%, f=20Hz to 20kHz); 46.6mm × 25.5mm × 8.5mm *
— 100W to 120W (THD=0.4%, f=20Hz to 20kHz); 59.2mm × 25.5mm × 8.5mm *
*: Not including the pins.
• Output load impedance: RL=6Ω
• Allowable load shorted time: 0.3 seconds
• Built-in thermal protection circuit
• Supports the use of standby, muting, and load shorting protection circuits.
Series Organization
These products are organized as a series based on their output capacity.
Item
Output 1 (0.4%/20Hz to 20kHz)
Output 2 (10%/1kHz)
Maximum supply voltage (6Ω)
Recommended supply voltage (6Ω)
Remarks
Package
Type No.
STK404-050S STK404-070S STK404-090S STK404-100S STK404-120S STK404-130S STK404-140S
30W
40W
50W
60W
80W
100W
120W
45W
60W
80W
90W
120W
150W
180W
±37V
±43V
±46V
±51V
±59V
±64V
±73V
±26V
±30V
±32V
±35V
±41V
±45V
±51V
— Built-in thermal protection circuit
44.0mm × 25.6mm × 8.5mm
46.6mm × 25.5mm × 8.5mm
59.2mm × 25.5mm × 8.5mm
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
52004TN (OT) No.7731-1/5
1 page  
STK404-140S
10
7
5
3
2
VCC = ±51 V
RL = 6 Ω
VG = 30 dB
Tc = 25°C
1.0
7
Rg = 600 Ω
5
3
2
0.1
7
5
3
2
THD — PO
20 kHz
20 Hz 1 kHz
0.01
7
5
3
2
0.01 2 3 5 7 0.1
360
340 RL=6Ω
320 VG=30dB
300 Rg=600Ω
280 Tc=25°C
260
2 3 5 7 1.0 2 3 5 7 10 2 3
Output power, PO — W
PO — VCC
5 7100 2 3
ITF02243
240
220
200
180
160
140
120
100
80
60
40
20
0
0 ±10 ±20 ±30 ±40 ±50 ±60 ±70 ±80
Supply voltage, VCC — V
ITF02362
100
VCC = ±51 V
90 RL = 6 Ω
VG = 30 dB
80 Tc = 25°C
70 Rg = 600 Ω
Pd — PO
60
50
40
30
20
10
0
0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 2 3
Output power, PO — W
ITF02244
PO — f
300
VCC = ±51 V
RL = 6 Ω
VG = 30 dB
Rg = 600 Ω
250 Tc = 25°C
THD = 10%
200
THD = 0.4%
150
100
10
2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3
Frequency, f — Hz
ITF02246
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of May, 2004. Specifications and information herein are subject to
change without notice.
PS No.7731-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet STK404-140S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STK404-140 | 1 CH AB AUDIO POWER IC | Sanyo |
| STK404-140N-E | 1ch class-AB Audio Power IC |  ON Semiconductor |
| STK404-140S | One-Channel Class AB Audio Power Amplifier IC | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |