Datasheet.kr   

ULN2003V12 데이터시트 PDF




Diodes에서 제조한 전자 부품 ULN2003V12은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ULN2003V12 자료 제공

부품번호 ULN2003V12 기능
기능 Multi-Channel Relay and Inductive Load Sink Driver
제조업체 Diodes
로고 Diodes 로고


ULN2003V12 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 8 페이지수

미리보기를 사용할 수 없습니다

ULN2003V12 데이터시트, 핀배열, 회로
ULN2003V12, ULN2003F12
Multi-Channel Relay and Inductive Load Sink Driver
Description
The ULN2003V12 and ULN2003F12 are multi-channel sink drivers
comprised of 7-channel and 4-channel output stages respectively.
The ULN2003V12 sink driver features 7 low output impedance drivers
that minimize on-chip power dissipation and an actual low power
upgrade version for popular ULN2003A family in real applications.
When driving a typical 12V relay coil, a ULN2003V12 will dissipate 12
times lower power compared to ULN2003A. ULN2003F12 is a lower
power variant benefiting from fewer channel integration and a better
fit for applications requiring only 4-channel drivers, such as driving
low voltage stepping motors, etc.
The ULN2003V12 and ULN2003F12 both support 3.3V to 5V CMOS
logic input interface, thus making it compatible to a wide range of
micro-controllers and other logic interfaces, and also feature an
improved input interface that minimizes the input DC current drawn
from the external drivers. The input RC snubber circuit integrated at
ULN2003V12 and ULN2003F12 improves the performance in noisy
operating conditions, and the internal pull-down resistor at input stage
helps allow input logic to be tri-stated.
As shown in the Functional Diagram, each output of the ULN2003V12
and ULN2003F12 features an internal free-wheeling diode connected
in a common-cathode configuration at the COM pin which provides
flexibility of increasing current sink capability through combining
several adjacent channels in parallel. Under typical conditions the
ULN2003V12 can support up to 1.0A of load current when all 7-
channels are connected in parallel.
Pin Assignments
( Top View )
IN1 1
IN2 2
IN3 3
IN4 4
IN5 5
IN6 6
7
GND 8
16 OUT1
15 OUT2
14 OUT3
13 OUT4
12 OUT5
11 OUT6
10 OUT7
9 COM
SO-16 / TSSOP-16
(Top View)
IN1
IN2
IN3
IN4
GND
1
2
3
4
5
10 OUT1
9 OUT2
8 OUT3
7 OUT4
6 COM
U-DFN3030-10
Features
4- and 7-Channel High Current Sink Drivers
Supports up to 20V Output Pull-up Voltage
Low Output VOL of 0.6V (Typical) with
100mA (Typ.) Current Sink per Channel at 3.3V Logic Input
140mA (Typ.) Current Sink per Channel at 5.0V Logic Input
Compatible to 3.3V and 5.0V Micro-Controllers and Logic
Interface
Internal Free-wheeling Diodes for Inductive Kick-back Protection
Input Pull-down Resistors Allows Tri-Stating the Input Driver
Input RC-Snubber to Eliminate Spurious Operation in Noisy
Environments
ESD: 4kV HBM, 1kV CDM
Available in 16-Pin SOIC, 16-Pin TSSOP and 10-Pin DFN3030
packages
• Available in “Green” Molding Compound (No Br, Sb)
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Applications
Inputs Compatible with Popular Logic Types
Relay Driver Applications
Stepping Motor Applications
Logic Level Shifter
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
1 of 8
www.diodes.com
February 2015
© Diodes Incorporated




ULN2003V12 pdf, 반도체, 판매, 대치품
ULN2003V12, ULN2003F12
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Specified over the recommended junction temperature range TJ = -40°C to +125°C and over recommended operating conditions unless otherwise
noted. Typical values are at TJ = +25°C.
Parameter
INPUTS IN1 THROUGH IN7 PARAMETERS
VI(on)
IN1~IN7 logic high input voltage
VI(OFF)
IN1~IN7 logic low input voltage
Test conditions
VCE = 2V, IC = 300mA
II = 250µA, IC = 100mA
Min Typ. Max Unit
1.65   V
  0.6 V
II(ON) IN1~IN7 ON state input current
IF = 350mA
II(OFF)
IN1~IN7 OFF state input leakage
OUTPUTS OUT1 THROUGH OUT7 PARAMETERS
VOL(VCE-SAT)
OUT1~OUT7 low-level output voltage
IOUT(ON)
OUT1~OUT7 ON-state continuous current at
VOUTX = 0.6V
IOUT(ON)
OUT1~OUT7 OFF-state leakage current
SWITCHING PARAMETERS
tPHL OUT1~OUT7 logic high propagation delay
tPLH OUT1~OUT7 logic low propagation delay
tCHANNEL
Channel to channel delay
RPD IN1~IN7 input pull-down resistance
ζ IN1~IN7 input filter time constant
COUT
OUT1~OUT7 output capacitance
FREE-WHEELING DIODE PARAMETERS
VF Forward voltage drop
IF-peak
Diode peak forward current
VINX = 3.3V, IOUTX = 20mA
VINX = 3.3V, IOUTX = 100mA
VINX = 5.0V, IOUTX = 20mA
VINX = 5.0V, IOUTX = 140mA
VINX = 3.3V, VOUTX = 0.6V
VINX = 5.0V, VOUTX = 0.6V
VINX = 0V, VOUTX = VCOM =16V
VINX = 3.3V, Vpull-up = 12V,
Rpull-up = 1kΩ
VINX = 3.3V, Vpull-up = 12V,
Rpull-up = 1kΩ
Over recommended operating conditions
and with same test conditions on
channels.
VINX = 3.3V, VOUTX = 0.4V
IF-peak = 140mA, VF = VOUTx -VCOM
80
95
210k
12
0.12
0.6
0.09
0.6
100
140
0.5
50
121
15
300k
9
15
1.2
140
25
250
0.15
0.75
0.11
0.75
70
140
50
390k
uA
nA
V
mA
uA
ns
ns
ns
Ω
ns
pF
V
mA
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
4 of 8
www.diodes.com
February 2015
© Diodes Incorporated

4페이지










ULN2003V12 전자부품, 판매, 대치품
Ordering Information
ULN2003V12, ULN2003F12
ULN2003 XXX XXX - X
Device
V12 : 7 Channels
F12 : 4 Channels
Package
S16 : SO-16
T16 : TSSOP-16
FN : U-DFN3030-10
Packing
7/13 : Tape & Reel
Device
ULN2003V12S16-13
ULN2003V12T16-13
ULN2003F12FN-7
Package Code
S16
T16
FN
Packaging
(Note 11)
SO-16
TSSOP-16
DFN3030-10
7/13” Tape and Reel
Quantity
Part Number Suffix
2,500/Tape & Reel
-13
2,500/Tape & Reel
-13
3,000/Tape & Reel
-7
Note:
8. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
(1) SO-16 and TSSOP-16
Logo
Part Number
Device:
V12 : 7 Channels
F12 : 4 Channels
( Top View )
16
9
ULN2003XXX
YY WW X X
18
YY : Year : 08, 09,10~
WW : Week : 01~52; 52
represents 52 and 53 week
XX : Internal Code
(2) DFN3030-10
( Top View )
XX
YWX
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : Internal Code
Part Number
ULN2003F12FN-7
Package
DFN3030-10
Identification Code
A3
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
7 of 8
www.diodes.com
February 2015
© Diodes Incorporated

7페이지


구       성 총 8 페이지수
다운로드[ ULN2003V12.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ULN2003V12

Multi-Channel Relay and Inductive Load Sink Driver

Diodes
Diodes
ULN2003V12

7-Channel Relay and Inductive Load Sink Driver ULN2003V12 (Rev. B)

Texas Instruments
Texas Instruments

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵