Datasheet.kr   

ATSAMD21J17A-MFT 데이터시트 PDF




ATMEL Corporation에서 제조한 전자 부품 ATSAMD21J17A-MFT은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ATSAMD21J17A-MFT 자료 제공

부품번호 ATSAMD21J17A-MFT 기능
기능 SMART ARM-Based Microcontroller
제조업체 ATMEL Corporation
로고 ATMEL Corporation 로고


ATSAMD21J17A-MFT 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 30 페이지수

미리보기를 사용할 수 없습니다

ATSAMD21J17A-MFT 데이터시트, 핀배열, 회로
SMART
Atmel SAM D21E / SAM D21G / SAM D21J
SMART ARM-Based Microcontroller
DATASHEET
Description
The Atmel® | SMARTSAM D21 is a series of low-power microcontrollers using the 32-bit
ARM® Cortex®-M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and
32KB of SRAM. The SAM D21 devices operate at a maximum frequency of 48MHz and reach
2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical
peripheral modules, hex compatible code, identical linear address map and pin compatible
migration paths between all devices in the product series. All devices include intelligent and
flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive
touch button, slider and wheel user interfaces.
The Atmel SAM D21 devices provide the following features: In-system programmable Flash,
twelve-channel direct memory access (DMA) controller, 12 channel Event System,
programmable interrupt controller, up to 52 programmable I/O pins, 32-bit real-time clock and
calendar, up to five 16-bit Timer/Counters (TC) and three 24-bit Timer/Counters for Control
(TCC), where each TC can be configured to perform frequency and waveform generation,
accurate program execution timing or input capture with time and frequency measurement of
digital signals. The TCs can operate in 8- or 16-bit mode, selected TCs can be cascaded to form
a 32-bit TC, and three timer/counters have extended functions optimized for motor, lighting and
other control applications. The series provide one full-speed USB 2.0 embedded host and device
interface; up to six Serial Communication Modules (SERCOM) that each can be configured to act
as an USART, UART, SPI, I2C up to 3.4MHz, SMBus, PMBus, and LIN slave; two-channel I2S
interface; up to twenty-channel 350ksps 12-bit ADC with programmable gain and optional
oversampling and decimation supporting up to 16-bit resolution, one 10-bit 350ksps DAC, two
analog comparators with window mode, Peripheral Touch Controller supporting up to 256
buttons, sliders, wheels and proximity sensing; programmable Watchdog Timer, brown-out
detector and power-on reset and two-pin Serial Wire Debug (SWD) program and debug interface.
All devices have accurate and low-power external and internal oscillators. All oscillators can be
used as a source for the system clock. Different clock domains can be independently configured
to run at different frequencies, enabling power saving by running each peripheral at its optimal
clock frequency, and thus maintaining a high CPU frequency while reducing power consumption.
The SAM D21 devices have two software-selectable sleep modes, idle and standby. In idle mode
the CPU is stopped while all other functions can be kept running. In standby all clocks and
functions are stopped expect those selected to continue running. The device supports
SleepWalking. This feature allows the peripheral to wake up from sleep based on predefined
conditions, and thus allows the CPU to wake up only when needed, e.g. when a threshold is
crossed or a result is ready. The Event System supports synchronous and asynchronous events,
allowing peripherals to receive, react to and send events even in standby mode.
The Flash program memory can be reprogrammed in-system through the SWD interface. The
same interface can be used for non-intrusive on-chip debug of application code. A boot loader
running in the device can use any communication interface to download and upgrade the
application program in the Flash memory.
The Atmel SAM D21 devices are supported with a full suite of program and system development
tools, including C compilers, macro assemblers, program debugger/simulators, programmers and
evaluation kits.
Atmel-42181G–SAM-D21_Datasheet–09/2015




ATSAMD21J17A-MFT pdf, 반도체, 판매, 대치품
Event System channels
SW Debug Interface
Watchdog Timer (WDT)
SAM D21J
12
Yes
Yes
SAM D21G
12
Yes
Yes
SAM D21E
12
Yes
Yes
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
4

4페이지










ATSAMD21J17A-MFT 전자부품, 판매, 대치품
2.1.2 Device Variant B
Ordering Code
ATSAMD21E15B-AU
ATSAMD21E15B-AUT
ATSAMD21E15B-AF
ATSAMD21E15B-AFT
ATSAMD21E15B-MU
ATSAMD21E15B-MUT
ATSAMD21E15B-MF
ATSAMD21E15B-MFT
ATSAMD21E15B-UUT
ATSAMD21E16B-AU
ATSAMD21E16B-AUT
ATSAMD21E16B-AF
ATSAMD21E16B-AFT
ATSAMD21E16B-MU
ATSAMD21E16B-MUT
ATSAMD21E16B-MF
ATSAMD21E16B-MFT
ATSAMD21E16B-UUT
2.2 SAM D21G
2.2.1 Device Variant A
Ordering Code
ATSAMD21G15A-AU
ATSAMD21G15A-AUT
ATSAMD21G15A-AF
ATSAMD21G15A-AFT
ATSAMD21G15A-MU
ATSAMD21G15A-MUT
ATSAMD21G15A-MF
ATSAMD21G15A-MFT
FLASH (bytes)
SRAM (bytes)
32K 4K
32K 4K
64K 8K
64K 8K
FLASH (bytes)
SRAM (bytes)
32K 4K
Package
TQFP32
QFN32
WLCSP35
TQFP32
QFN32
WLCSP35
Package
TQFP48
QFN48
Carrier Type
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tape & Reel
Carrier Type
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
7

7페이지


구       성 총 30 페이지수
다운로드[ ATSAMD21J17A-MFT.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ATSAMD21J17A-MF

SMART ARM-Based Microcontroller

ATMEL Corporation
ATMEL Corporation
ATSAMD21J17A-MFT

SMART ARM-Based Microcontroller

ATMEL Corporation
ATMEL Corporation

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵