Datasheet.kr   

IZE4406 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 IZE4406
기능 Intelligent 104-Bit EEPROM Counter
제조업체 Integral
로고 Integral 로고 


전체 4 페이지

		

No Preview Available !

IZE4406 데이터시트, 핀배열, 회로
IZE4406
Intelligent 104-Bit EEPROM Counter
for > 20000 Units with Security Logic
The chip contains an EEPROM/PROM of 88 bits, a mask ROM of 16 bits and a
sequencing control with security logic.
Memory (104 bits) is divided into the following functional areas
In the condition as supplied, the transport code and the error counter are activated. The
chip can only be read (except for the transport-code area) and only the error counter can
be written.
Following correct entry of the transport code, the entire memory can be read and areas II
and III can be written and EEPROM part of area III can be erased.
After the control flag has been written, everything is readable and only area III can be
programmed, but with the following changes:
- The transport code and the error counter are no longer activated.
- The area of the former transport code and the error counter can be erased byte by byte
with carry.
- The entire area III can be written bit by bit
NB: When the control flag is written, the counter stage below it (the error counter) can be
erased at the same time.
FEATURES
104 x 1 bit organization
Three memory areas with special characteristics (eg ROM, PROM, EEPROM)
Maximum of 20480 count units
Special security features
Minimum of 104 write/erase cycles
Data retention for minimum of ten years
Contact configuration and serial interface in accordance to ISO standard 7816-3
(synchronous transmission)
PIN DEFINITIONS AND FUNCTIONS
Card Contact Pad
Symbol
C7 01 I/O
02 P
C3 03 CLC
C2 04 RST
C1 05 Vcc
C6 N.C.
C5 06 GND
Function
Bidirectional data line (open drain)
Code entry on “Input” only for transport
Test input
Clock input
Control input (reset)
Supply voltage
Not connected
Ground
IZ4406 comes as an M1 wire-bonded module for embedding in plastic cards and as a die
for customer packaging
1




IZE4406 pdf, 반도체, 판매, 대치품
IZE4406
Chip Size (mm): x = 1,1±0.03 , y = 1,1± 0.03
Thickness of chip (mm): 0,18 ± 0,01
PAD DESCRIPTION
Pad Symbol
No.
Description
01 I/O Bidirectional data line
(open drain) Code entry on
“Input” only for transport
02 P Test input
03 CLC Clock input
04 RST Control input (reset)
05 Vcc Supply voltage
06 GND Ground
PAD LOCATION
Pad Location (Left
No. Lower corner), mm
XY
01 0.8530 0.2530
Pad size,
mm
0,100 x 0,100
02 0.8530 0.6105 0,100 x 0,100
03 0.8530 0.8395 0,100 x 0,100
04 0.1530 0.8435 0,100 x 0,100
05 0.1530 0.5635 0,100 x 0,100
06 0,1440 0,1640 0,100 x 0,100
4

4페이지













구       성총 4 페이지
다운로드[ IZE4406.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
IZE4406

Intelligent 104-Bit EEPROM Counter

Integral
Integral
IZE4406C

Intelligent 104-Bit EEPROM Counter

Integral
Integral

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵