|
|
|
부품번호 | MURF820 기능 |
|
|
기능 | Power Rectifier | ||
제조업체 | ON Semiconductor | ||
로고 | |||
MURF820
Advance Information
SWITCHMODE™
Power Rectifier
Designed for use in switching power supplies, inverters and as free
wheeling diodes, these state−of−the−art devices have the following
features:
• Ultrafast 35 ns Recovery Times
• 150°C Operating Junction Temperature
• Epoxy Meets UL94, VO @ 1/8″
• High Temperature Glass Passivated Junction
• Low Leakage Specified @ 150°C Case Temperature
• Current Derating @ Both Case and Ambient Temperatures
• Electrically Isolated. No Isolation Hardware Required.
• UL Recognized File #E69369(1)
http://onsemi.com
ULTRAFAST RECTIFIER
8 AMPERES, 200 VOLTS
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 1.9 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10
Seconds
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Rated VR), TC = 150°C
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz), TC = 150°C
Non−repetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
1
3
CASE 221E−01
ISOLATED TO−220
1
3
Symbol
VRRM
VRWM
VR
IF(AV)
IFM
IFSM
Value
200
8
16
100
Unit
Volts
Amps
Amps
Amps
Operating Junction and Storage Temperature
RMS Isolation Voltage (t = 1 second, R.H. ≤ 30%, TA = 25°C) (2)
THERMAL CHARACTERISTICS
Per Figure 3
Per Figure 4 (1)
Per Figure 5
TJ, Tstg
Viso1
Viso2
Viso3
− 65 to +150
4500
3500
1500
°C
Volts
Maximum Thermal Resistance, Junction to Case
Lead Temperature for Soldering
Purposes: 1/8″ from Case for 5 seconds
(1) UL Recognized mounting method is per Figure 4.
(2) Proper strike and creepage distance must be provided.
RθJC 4.2 °C/W
TL 260 °C
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
© Semiconductor Components Industries, LLC, 2006
September, 2006 − Rev. 2
1
Publication Order Number:
MURF820/D
F −B−
Q
A
H
K
123
−Y−
MURF820
PACKAGE DIMENSIONS
CASE 221E−01
ISSUE O
−T−
SEATING
PLANE
C
S
U
G
N
L
D 2 PL
0.25 (0.010) M B M Y
J
R
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
INCHES
DIM MIN MAX
A 0.621 0.629
B 0.394 0.402
C 0.181 0.189
D 0.026 0.034
F 0.121 0.129
G 0.100 BSC
H 0.123 0.129
J 0.018 0.025
K 0.500 0.562
L 0.045 0.060
N 0.200 BSC
Q 0.126 0.134
R 0.107 0.111
S 0.096 0.104
U 0.259 0.267
MILLIMETERS
MIN MAX
15.78 15.97
10.01 10.21
4.60 4.80
0.67 0.86
3.08 3.27
2.54 BSC
3.13 3.27
0.46 0.64
12.70 14.27
1.14 1.52
5.08 BSC
3.21 3.40
2.72 2.81
2.44 2.64
6.58 6.78
STYLE 1:
PIN 1. CATHODE
2. N/A
3. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MURF820/D
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ MURF820.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MURF820 | GLASS PASSIVATED SUPER FAST RECTIFIER | JINAN JINGHENG ELECTRONICS |
MURF820 | (MURF805 - MURF860) Isolation Super Fast Recovery Rectifier | MCC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |