|
|
PDF LV8417CS Data sheet ( Hoja de datos )
| Número de pieza | LV8417CS | |
| Descripción | Forward/Reverse Motor Driver | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LV8417CS (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : ENA1996
LV8417CS
Bi-CMOS IC
Forward/Reverse Motor Driver
http://onsemi.com
Overview
The LV8417CS is a 1-channel H bridge motor driver IC. The package size is extremely small with wafer level package
(WLP). Moreover, the on-resistance is low (upper and lower total 0.27Ω typ.).
The application voltage range is wide (2.0V to 10.5V).
The H bridge of this IC is P-N composition and thereby reduces the external parts without need of charge pump.
Therefore, LV8417CS realizes reduction of mounting area which enables lower cost and smaller application size.
Functions
• H-bridge 1-channel forward/reverse motor driver
• IO max=1.0A (t≤100ms 2.0A, t≤10ms 3.8A)
• BiCDMOS process
• Built-in low voltage reset and thermal shutdown circuit
• Output ON resistance (Upper and lower total 0.27Ω; Ts=25°C, IO=1.0A)
Specifications
Maximum Ratings at Ta = 25°C, SGND = PGND = 0V
Parameter
Power supply voltage (for load)
Power supply voltage (for control)
Output current
Output peak current
Input voltage
Allowable power dissipation
Symbol
VM max
VCC max
IO max
IO peak1
IO peak2
VIN max
Pd max
Conditions
t ≤ 100ms
t ≤ 10ms
Mounted on a specified board *
Ratings
-0.5 to 12.6
-0.5 to 6.0
1.0
2.0
3.8
-0.5 to VCC+0.5
850
Unit
V
V
A
A
A
V
mW
Operating temperature
Topr
-20 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
* Specified board : 57mm × 57mm × 1.6mm, glass epoxy both side board.
Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time.
Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current,
high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Components Industries, LLC, 2013
May, 2013
D0711 SY 20111012-S00003 No.A1996-1/5
1 page  
Sample Application Circuit
LV8417CS
OUT1
Motor connect pin
OUT2
OUT1
PGND
OUT2
VCC
SGND
VM
ENA
IN1
IN2
VCC
(Power pin for control)
SW1
SW2
SW3
VIN
(Power pin for switch)
ENA
IN1
Logic input pin
IN2
VM
(Power pin for loads)
* Connect a kickback absorbing capacitor as close as possible to the IC. Characteristics deterioration of the IC or damage
may result if an instantaneous voltage surge exceeding the maximum rated value is applied to the VM line due to coil
kickback or other causes.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.A1996-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LV8417CS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LV8417CS | Forward/Reverse Motor Driver |  Sanyo Semicon Device |
| LV8417CS | Forward/Reverse Motor Driver | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |