|
|
|
부품번호 | KBJL6JA 기능 |
|
|
기능 | Glass Passivated Single-Phase Bridge Rectifier | ||
제조업체 | GOOD-ARK | ||
로고 | |||
Features
◆ Thin Single In-Line package;
◆ Ideal for printed circuit boards;
◆ Glass Passivated chip junction;
◆ Low profile package;
◆ High Surge current capability;
◆ High case dielectric strength of 2000 VRMS;
◆ Plastic package has Underwrites Laboratory
Flammability Classification 94V-0;
◆ Same footprint V.S KBJ (3S) package;
KBJL6JA THRU KBJL6MA
Glass Passivated Single-Phase Bridge Rectifier
Reverse Voltage - 600V to 1000V
Forward Current - 6.0 Amperes
-
+~~
Mechanical Data
◆ Case: KBJL;
Epoxy meets UL-94V-0 Flammability rating;
◆ Terminals:Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102;
E3 suffix for customer grade, meet JESD 201
class 1A whisker test;
◆ High temperature soldering guaranteed:
Solder Dip 275℃,40seconds;
◆ Polarity: As marked on body;
◆ Mounting Torgue: 5.7cm-kg (5.0 inches-lbs) max;
◆ Recommend Torgue:Mounting Torgue:
5.7cm-kg (5inches-lbs);
Typical Applications
General purpose use in AC-to-DC bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment,
Industrial Automation applications.
Package Dimensions in mm
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Parameter
Symbol KBJL6JA KBJL6KA KBJL6MA Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
TC=110℃
rectified output current at
TA=25℃
Peak forward surge current 8.3 ms single sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
Maximum Instantaneous forward voltage drop per leg at 3.0A
Maximum DC Reverse Current at Rated
DC Blocking Voltage per leg
TA=25℃
TA=125℃
Typical thermal resistance per leg
Operating junction and Storage Temperature Range
VRRM
VRMS
VDC
IF(AV)
IFSM
I2t
VF
IR
RӨJA
RӨJC
TJ,TSTG
600 800 1000
420 560 700
600 800 1000
6.0 (1)
2.0 (2)
90
34
1.0
5
150
20 (2)
2.5 (1)
-55 to +150
V
V
V
Amps
Amps
A2sec
Volt
μA
℃/W
℃
Notes:
1). Unit case mounted on Al plate heatsink;
2). Units mounted on PCB without heatsink;
3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ KBJL6JA.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
KBJL6JA | Glass Passivated Single-Phase Bridge Rectifier | GOOD-ARK |
KBJL6JU | Glass Passivated Single-Phase Bridge Rectifier | GOOD-ARK |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |