|
|
|
부품번호 | NVSA219BT 기능 |
|
|
기능 | LED | ||
제조업체 | NICHIA | ||
로고 | |||
전체 19 페이지수
NICHIA STS-DA1-2797A <Cat.No.130617>
NICHIA CORPORATION SPECIFICATIONS FOR AMBER LED
NVSA219BT
● Pb-free Reflow Soldering Application
● Built-in ESD Protection Device
● RoHS Compliant
CHROMATICITY DIAGRAM
NICHIA STS-DA1-2797A <Cat.No.130617>
0.50
0.45
0.40
0.35
580
585
L 590
595
600
0.30
0.45
0.50
0.55
x
0.60
0.65
3
4페이지 NICHIA STS-DA1-2797A <Cat.No.130617>
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a hot plate should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
* The Die Heat Sink should be soldered to customer PCB.
If it is difficult or impossible, use high heat-dissipating adhesive.
* When soldering, do not apply stress to the LED while the LED is hot.
* This product uses an electrode pad design which improves thermal shock resistance.
After mounting, it is recommended to check if the solder fillets are properly formed on the sides of the pads.
* The recommended soldering pad pattern is designed for attachment of the LED without problems.
When precise mounting accuracy is required, such as high-density mounting, ensure that the size and shape of the pad
are suitable for the circuit design.
* When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner
where the flux will come in contact with the LEDs.
* Make sure that there are no issues with the type and amount of solder that is being used.
6
7페이지 | |||
구 성 | 총 19 페이지수 | ||
다운로드 | [ NVSA219BT.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
NVSA219BT | LED | NICHIA |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |