DataSheet.es    


PDF ISL78301 Data sheet ( Hoja de datos )

Número de pieza ISL78301
Descripción 150mA Linear Regulator
Fabricantes Intersil 
Logotipo Intersil Logotipo



Hay una vista previa y un enlace de descarga de ISL78301 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! ISL78301 Hoja de datos, Descripción, Manual

DATASHEET
40V, Low Quiescent Current, 150mA Linear Regulator
for Automotive Applications
ISL78301
The ISL78301 is a high voltage, low quiescent current linear
regulator ideally suited for “always-on” and “keep alive”
automotive applications. The ISL78301 operates from an input
voltage of +6V to +40V under normal operating conditions and
operates down to +3V under a cold crank. It consumes only 18µA
of quiescent current at no load on the adjustable version.
The ISL78301 is available in a fixed 3.3V, 5V and adjustable
output voltage (2.5V to 12V) options. It features an EN pin that
can be used to put the device into a low-quiescent current
shutdown mode where it draws only 2µA of supply current. The
device features over-temperature shutdown and current limit
protection.
The ISL78301 is AEC-Q100 qualified. It is rated over the -40°C to
+125°C automotive temperature range and is available in a
14 Ld HTSSOP with an exposed pad package.
Applications
• Automotive
• Industrial
• Telecommunications
Features
• Optimized for “always-on” automotive applications
• 18µA typical quiescent current
• Guaranteed 150mA output current
• Operates through cold crank down to 3V
• 40V tolerant logic level (TTL/CMOS) enable input
• 2µA of typical shutdown current
• Low dropout voltage of 295mV at 150mA
• Fixed +3.3V, +5.0V and adjustable output voltage options
• Stable operation with 10µF output capacitor
• Thermal shutdown and current limit protection
• -40°C to +125°C operating temperature range
• Thermally enhanced 14 Ld exposed pad HTSSOP package
• AEC-Q100 qualified
• 5kV ESD HBM rated
• Pb-free (RoHS compliant)
VIN = 14V
CIN
0.1µF
IN
EN
(ISL78301)
OUT
VOUT = 12V
R1
ADJ
COUT
10µF
GND
R2
FIGURE 1. TYPICAL APPLICATION - ADJ VERSION
25
VIN = 14V
CIN
0.1µF
IN
EN
(ISL78301)
OUT
VOUT = 5V
COUT
10µF
GND
FIGURE 2. TYPICAL APPLICATION - FIXED VERSION
20
15
10
5
0
-50 0
50 100 150
TEMPERATURE (°C)
FIGURE 3. QUIESCENT CURRENT vs LOAD CURRENT (ADJ VERSION AT UNITY GAIN) VIN = 14V
April 7, 2015
FN6705.2
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2011, 2013, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 page




ISL78301 pdf
ISL78301
Electrical Specifications Recommended Operating Conditions, unless otherwise noted. VIN = 14V, IOUT = 1mA, CIN = 0.1μF,
COUT = 10μF, TA = TJ = -40°C to +125°C, unless otherwise noted. Typical specifications are at TA = +25°C. Boldface limits apply across the operating
temperature range, -40°C to +125°C. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN MAX
(Note 8) TYP (Note 8) UNIT
Power Supply
Rejection Ratio
EN FUNCTION
PSRR
f = 100Hz; VIN_RIPPLE = 500mVP-P; Load = 150mA, 3.3V and 5V Versions
f = 100Hz; VIN_RIPPLE = 500mVP-P; Load = 150mA, ADJ Version, VOUT = VADJ
55
66
dB
EN Threshold Voltage
EN Pin Current
EN to Regulation Time
(Note 7)
VEN_H
VEN_L
IEN
tEN
VOUT = Off to On
VOUT = On to Off
VOUT = 0V
0.975
0.026
1.65
1.485
1.93
V
V
µA
ms
PROTECTION FEATURES
Output Current Limit
Thermal Shutdown
Thermal Shutdown
Hysteresis
ILIMIT
TSHDN
THYST
VOUT = 0V
Junction Temperature Rising
175 410
+165
+20
mA
°C
°C
NOTES:
6. Dropout voltage is defined as (VIN - VOUT) when VOUT is 2% below the value of VOUT when VIN = VOUT + 3V.
7. Enable to Regulation is the time the output takes to reach 95% of its final value with VIN = 14V and EN is taken from VIL to VIH in 5ns. For the
adjustable versions, the output voltage is set at 5V.
8. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Submit Document Feedback
5
FN6705.2
April 7, 2015

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet ISL78301.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ISL78301150mA Linear RegulatorIntersil
Intersil
ISL78302Dual LDOIntersil
Intersil
ISL78302ADual LDOIntersil
Intersil
ISL7830750mA Linear RegulatorIntersil
Intersil

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar