|
|
PDF SQD40N10-25 Data sheet ( Hoja de datos )
| Número de pieza | SQD40N10-25 | |
| Descripción | Automotive N-Channel MOSFET | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SQD40N10-25 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.vishay.com
SQD40N10-25
Vishay Siliconix
Automotive N-Channel 100 V (D-S) 175 °C MOSFET
PRODUCT SUMMARY
VDS (V)
RDS(on) (Ω) at VGS = 10 V
RDS(on) (Ω) at VGS = 4.5 V
ID (A)
Configuration
Package
100
0.025
0.029
40
Single
TO-252
FEATURES
• TrenchFET® power MOSFET
• Package with low thermal resistance
• 100 % Rg and UIS tested
• AEC-Q101 qualified
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
TO-252
Drain connected to tab
D
G
S
D
G
Top View
S
N-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current
Continuous Source Current (Diode Conduction) a
TC = 25 °C a
TC = 125 °C
Pulsed Drain Current b
Single Pulse Avalanche Current
Single Pulse Avalanche Energy
L = 0.1 mH
Maximum Power Dissipation b
TC = 25 °C
TC = 125 °C
Operating Junction and Storage Temperature Range
VDS
VGS
ID
IS
IDM
IAS
EAS
PD
TJ, Tstg
LIMIT
100
± 20
40
26
40
160
40
80
136
45
-55 to +175
THERMAL RESISTANCE RATINGS
PARAMETER
Junction-to-Ambient
Junction-to-Case (Drain)
PCB Mount c
Notes
a. Package limited.
b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
c. When mounted on 1" square PCB (FR4 material).
SYMBOL
RthJA
RthJC
LIMIT
50
1.1
UNIT
V
A
mJ
W
°C
UNIT
°C/W
S15-1873-Rev. E, 10-Aug-15
1
Document Number: 69064
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
1000
100
10
IDM Limited
Limited by
RDS(on)*
ID Limited
1
SQD40N10-25
Vishay Siliconix
100 µs
1 ms
10 ms
100 ms, 1 s, 10 s, DC
0.1
TC = 25 °C
Single Pulse
BVDSS Limited
0.01
0.01
* VGS
0.1 1 10 100
VDS - Drain-to-Source Voltage (V)
minimum VGS at which RDS(on) is specified
Safe Operating Area
2
1
Duty Cycle = 0.5
0.2
0.1 0.1
0.05
0.02
0.01
10-4
Single Pulse
10-3
10-2
10-1
1
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
100
1000
S15-1873-Rev. E, 10-Aug-15
5
Document Number: 69064
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page 
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SQD40N10-25.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SQD40N10-25 | Automotive N-Channel MOSFET |  Freescale |
| SQD40N10-25 | Automotive N-Channel MOSFET | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |