DataSheet.es    


PDF TLI4965-5M Data sheet ( Hoja de datos )

Número de pieza TLI4965-5M
Descripción High Precision Hall Effect Switch
Fabricantes Infineon 
Logotipo Infineon Logotipo



Hay una vista previa y un enlace de descarga de TLI4965-5M (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! TLI4965-5M Hoja de datos, Descripción, Manual

High Precision Hall Effect Switch
for 5V Applications
TLI4965-5M
SP000930190
Hall Effect Switch
Data Sheet
Revision 1.0, 2016-01-11
Sense & Control

1 page




TLI4965-5M pdf
TLI4965-5M
Product Description
1 Product Description
1.1 Overview
The TLI4965-5M is a high precision Hall effect unipolar switch with highly accurate switching thresholds for
operating temperatures up to 125°C.
Characteristic
Unipolar Hall
Effect Switch
Supply Voltage
3.0 ~ 5.5 V
Supply Current
1.5 mA
Sensitivity
High
BOP: 7.5 mT
BRP: 5.0 mT
Interface
Open Drain
Output
Temperature
-40°C to 125°C
Figure 1 Image of TLI4965-5M in the PG-SOT23-3-15 Package
1.2 Features
• 3.0 V to 5.5 V operating supply voltage
• Operation from regulated power supply
• Active error compensation
• High stability of magnetic thresholds
• Low jitter (typ. 0.28 μs)
• 4kV ESD (HBM) performance
• Small SMD package PG-SOT23-3-15
• For industrial and consumer applications, not qualified for automotive applications
1.3 Target Applications
Target applications for the TLI4965-5M Hall switch are all applications which require a high precision Hall
Switch with an operating temperature range from -40°C to 125°C.
The TLI4965-5M is a unipolar switch with a typical operating point BOP = 7.5mT and a hysteresis of Bhys = 2.5mT.
It is ideally suited for various position detection applications, e.g. gear stick, steering lock or brake light.
Table 1 Ordering Information
Product Name
Product Type
TLI4965-5M
Unipolar Hall Switch
Ordering Code
SP000930190
Package
PG-SOT23-3-15
Data Sheet
5 Revision 1.0, 2016-01-11

5 Page





TLI4965-5M arduino
TLI4965-5M
Specification
3.2 Absolute Maximum Ratings
Table 3 Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Unit Note or Test Condition
Min. Typ. Max.
Supply voltage
Output voltage
Ambient
temperature1)
VDD -0.3
VQ -0.5
TA -40
6V
6V
150 °C for 2000h (not additive)
Thermal resistance
Junction ambient
RthJA
300 K/W for PG-SOT23-3-15 (2s2p)
Thermal resistance
Junction lead
RthJL
100 K/W for PG-SOT23-3-15
1) This lifetime statement is an anticipation based on an extrapolation of Infineon’s qualification test results. The actual
lifetime of a component depends on its form of application and type of use etc. and may deviate from such statement.
The lifetime statement shall in no event extend the agreed warranty period.
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
Calculation of the dissipated power PDIS and junction temperature TJ of the chip (SOT23 example):
e.g. for: VDD = 5 V, IS = 2 mA, VQSAT = 0.5 V, IQ = 1 mA
Power dissipation: PDIS = 5 V x 2 mA + 0.5 V x 1 mA = 10 mW + 0.5 mW = 10.5 mW
Temperature ΔT = RthJA x PDIS = 300 K/W x 10.5 mW = 3.15 K
For TA = 150 °C: TJ = TA + ΔT = 150 °C + 3.15 K = 153.15 °C
Table 4 ESD Protection1) (TA = 25°C)
Parameter
Symbol
Values
Unit Note or Test Condition
Min. Typ. Max.
ESD voltage (HBM)2)
ESD voltage (CDM)3)
VESD
-4
-1
4 kV R = 1.5 kΩ, C = 100 pF
1 kV
1) Characterization of ESD is carried out on a sample basis, not subject to production test.
2) Human Body Model (HBM) tests according to ANSI/ESDA/JEDEC JS-001.
3) Charged Device Model (CDM), ESD susceptibility according to JEDEC JESD22-C101.
Data Sheet
11 Revision 1.0, 2016-01-11

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet TLI4965-5M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TLI4965-5MHigh Precision Hall Effect SwitchInfineon
Infineon

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar