|
|
PDF AUIRF1324WL Data sheet ( Hoja de datos )
| Número de pieza | AUIRF1324WL | |
| Descripción | Power MOSFET ( Transistor ) | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRF1324WL (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
AUTOMOTIVE GRADE
PD - 97676A
AUIRF1324WL
Features
l Advanced Process Technology
l Ultra Low On-Resistance
l 50% Lower Lead Resistance
l 175°C Operating Temperature
l Fast Switching
l Repetitive Avalanche Allowed up to Tjmax
l Lead-Free, RoHS Compliant
l Automotive Qualified *
HEXFET® Power MOSFET
D V(BR)DSS
24V
RDS(on) typ.
1.16m
cG
max.
1.30m
ID (Silicon Limited)
382A
S ID (Package Limited)
240A
Description
Specifically design for automotive applications this Widelead TO-
262 package part has the advantage of having over 50% lower
lead resistance and delivering over 20% lower Rds(on) when
compared with a traditional TO-262 package housing the same
silicon die. This greatly helps in reducing condition losses, achieving
higher current levels or enabling a system to run cooler and have
improved efficiency. Additional features of this design are a 175°C
junction operating temperature, fast switching speed and improved
repetitive avalanche rating . These features combine to make this
design an extremely efficient and reliable device for use in
Automotive and other applications.
G
Gate
S
D
G
TO-262 WideLead
D
Drain
S
Source
Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
These are stress ratings only; and functional operation of the device at these or any other condition beyond those
indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions for extended
periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under
board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
Parameter
Max.
Units
ID @ TC = 25°C
ID @ TC = 100°C
ID @ TC = 25°C
IDM
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V (Package Limited)
dPulsed Drain Current
382
270
240
1530
A
PD @TC = 25°C Maximum Power Dissipation
300 W
Linear Derating Factor
2.0 W/°C
VGS
EAS (Thermally limited)
IAR
EAR
dv/dt
Gate-to-Source Voltage
eSingle Pulse Avalanche Energy
ÃdAvalanche Current
dRepetitive Avalanche Energy
fPeak Diode Recovery
± 20
530
See Fig. 14, 15, 22a, 22b,
1.3
V
mJ
A
mJ
V/ns
TJ Operating Junction and
-55 to + 175
TSTG
Storage Temperature Range
°C
Soldering Temperature, for 10 seconds
300 (1.6mm from case)
Thermal Resistance
Parameter
jRJC Junction-to-Case
Typ.
–––
Max.
0.50
Units
°C/W
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
10/20/11
1 page  
10000
1000
100
TJ = 175°C
TJ = 25°C
10
VGS = 0V
1.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
VSD, Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
400
Limited By Package
300
200
100
0
25 50 75 100 125 150
TC , Case Temperature (°C)
Fig 9. Maximum Drain Current vs.
Case Temperature
1.6
175
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-5 0 5 10 15 20 25
VDS, Drain-to-Source Voltage (V)
Fig 11. Typical COSS Stored Energy
www.irf.com
AUIRF1324WL
10000
1000
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100μsec
100
1msec
10 DC
10msec
1 Tc = 25°C
Tj = 175°C
Single Pulse
0.1
0.1 1 10 100
VDS, Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
30
Id = 5mA
29
28
27
26
25
24
-60 -40 -20 0 20 40 60 80 100120140160180
TJ , Temperature ( °C )
Fig 10. Drain-to-Source Breakdown Voltage
2500
2000
1500
ID
TOP 99A
100A
BOTTOM 195A
1000
500
0
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
Fig 12. Maximum Avalanche Energy vs. DrainCurrent
5
5 Page 
AUIRF1324WL
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make
corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or
services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards
to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order
acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing
and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government
requirements, testing of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR
components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all
associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice.
IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and
any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any
such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or
death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold
International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are designed and manufactured
to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR
products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer’s own risk and that they are
solely responsible for compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR
as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use
any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet AUIRF1324WL.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRF1324WL | Power MOSFET ( Transistor ) | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |