|
|
Número de pieza | F2915 | |
Descripción | High Reliability SP5T RF Switch | |
Fabricantes | Integrated Device Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de F2915 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
No Preview Available ! High Reliability SP5T RF Switch
GENERAL DESCRIPTION
The F2915 is a high reliability, low insertion loss, 50 Ω
SP5T absorptive RF switch designed for a multitude of
RF applications including wireless communications.
This device covers a broad frequency range from 400
MHz to 8000 MHz. In addition to providing low
insertion loss, the F2915 also delivers excellent
linearity and isolation performance while providing a
50 Ω termination to the unused RF input ports. The
F2915 also includes a patent pending constant
impedance (KZ) feature. KZ improves system hot
switching ruggedness, minimizes LO pulling in VCOs,
and reduces phase and amplitude variations in
distribution networks. It is also ideal for dynamic
switching/selection between two or more amplifiers
while avoiding damage to upstream /downstream
sensitive devices such as PAs and ADCs.
The F2915 uses a single positive supply voltage
supporting three logic control pins using either 3.3 V or
1.8 V control logic. Connecting a negative voltage to
pin 20 disables the internal negative voltage generator
and becomes the negative supply.
COMPETITIVE ADVANTAGE
The F2915 provides constant impedance in all RF ports
during transitions improving a system’s hot-switching
ruggedness. The device also supports high power
handling, and high isolation; particularly important for
DPD receiver use.
Constant impedance K|Z| during switching transition
RFX to RFC Isolation = 50 dB*
Insertion Loss = 1.1 dB*
IIP3: +60.5 dBm*
Extended temperature: -40 °C to +105 °C
* 4 GHz
APPLICATIONS
• Base Station 2G, 3G, 4G
• Portable Wireless
• Repeaters and E911 systems
• Digital Pre-Distortion
• Point to Point Infrastructure
• Public Safety Infrastructure
• Military Systems, JTRS radios
• Cable Infrastructure
• Test / ATE Equipment
F2915
Datasheet
400 MHz to 8000 MHz
FEATURES
• Five symmetric, absorptive RF ports
• High Isolation: 50 dB @ 4000 MHz
• Low Insertion Loss: 1.1 dB @ 4000 MHz
• High Linearity:
o IIP2 of 124 dBm @ 2000 MHz
o IIP3 of 60.5 dBm @ 4000 MHz
• High Operating Power Handling:
o 33 dBm CW on selected RF port
o 27 dBm on terminated ports
• Single 2.7 V to 5.5 V supply voltage
• External Negative Supply Option
• 3.3 V and 1.8 V compatible control logic
• Operating Temperature -40 °C to +105 °C
• 4 mm x 4 mm 24 pin QFN package
• Pin compatible with competitors
FUNCTIONAL BLOCK DIAGRAM
RFC
VSSEXT V3
RF5
RF4
K|Z|
50Ω
50Ω
50Ω
Control
Circuit
50Ω
50Ω
V2
V1
RF1
RF3 RF2
ORDERING INFORMATION
Tape &
Reel
F2915NBGK8
RF Product Line
Green
F2915, Rev O 12/14/2015
1 © 2015 Integrated Device Technology, Inc.
1 page TABLE 1: SWITCH CONTROL TRUTH TABLE
Mode
All off
RF1 on
RF2 on
RF3 on
RF4 on
RF5 on
All off
All off
V3 V2 V1
0 00
0 01
0 10
0 11
1 00
1 01
1 10
1 11
F2915
TYPICAL OPERATING CONDITIONS (TOC)
Unless otherwise noted for the TOC graphs on the following pages, the following conditions apply.
• VDD = 3.3 V.
• TCASE = +25 ºC (TCASE = Temperature of exposed paddle).
• FRF = 2000 MHz.
• RFX is the driven RF port and RFC is the output port.
• Pin = 10 dBm for all small signal tests.
• Pin = +15 dBm/tone applied to selected RFX port for two tone linearity tests.
• Two tone frequency spacing = 5 MHz.
• ZS = ZL = 50 ohms.
• All unused RF ports terminated into 50 ohms.
• For Insertion Loss and Isolation plots, RF trace and connector losses are de-embedded (see
EVKIT Board and Connector loss plot).
• Plots for Isolation and Insertion Loss over temperature and voltage are for a typical path. For
performance of a specific path, refer to the online S-Parameter file.
Rev O 12/14/2015
5 High Reliability SP5T RF Switch
5 Page LAND PATTERN DIMENSION
F2915
Land Pattern to Support 2.7 mm x 2.7 mm Exposed Paddle Version
(See Version P3 of Package Drawing)
Rev O 12/14/2015
11 High Reliability SP5T RF Switch
11 Page |
Páginas | Total 19 Páginas | |
PDF Descargar | [ Datasheet F2915.PDF ] |
Número de pieza | Descripción | Fabricantes |
F2910 | Constant Impedance SPST RF Switch | Integrated Device Technology |
F2915 | High Reliability SP5T RF Switch | Integrated Device Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |