Datasheet.kr   

NVSW119CT 데이터시트 PDF




NICHIA에서 제조한 전자 부품 NVSW119CT은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 NVSW119CT 자료 제공

부품번호 NVSW119CT 기능
기능 LED
제조업체 NICHIA
로고 NICHIA 로고


NVSW119CT 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 23 페이지수

미리보기를 사용할 수 없습니다

NVSW119CT 데이터시트, 핀배열, 회로
NICHIA STS-DA1-3562A <Cat.No.150602>
NICHIA CORPORATION SPECIFICATIONS FOR WHITE LED
NVSW119CT
Pb-free Reflow Soldering Application
Built-in ESD Protection Device
RoHS Compliant




NVSW119CT pdf, 반도체, 판매, 대치품
NICHIA STS-DA1-3562A <Cat.No.150602>
Luminous Flux Ranks by Color Rank, Color Rendering Index Rank
Ranking by
Luminous Flux
Ranking by
D240 D260
Color Coordinates,
Color Rendering Index
sm503,sm505,sm507
Rnn,R70
R8000
sm573,sm575,sm577,
sm653,sm655,sm657
R70
D280
D300
D320
3

4페이지










NVSW119CT 전자부품, 판매, 대치품
SOLDERING
NICHIA STS-DA1-3562A <Cat.No.150602>
• Recommended Reflow Soldering Condition(Lead-free Solder)
1 to 5°C per sec
Pre-heat
180 to 200°C
60sec Max
Above 220°C
260°CMax
10sec Max
• Recommended Hand Soldering Condition
Temperature
350°C Max
Soldering Time
3sec Max
120sec Max
Recommended Soldering Pad Pattern
* This LED is designed to be reflow soldered on to a PCB. If dip soldered, Nichia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once.
* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.
* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,
caused by heat and/or atmosphere.
* Since the silicone used in the encapsulating resin is soft, do not press on the encapsulant resin.
Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and bump breaks, decreasing reliability.
When using automatic pick and place machine, use a pick up nozzle which does not directly apply stress
to the encapsulation of the LEDs.
Recommended conditions:
Using a nozzle designed for the LEDs is recommended. (See Figure below)
* The nozzle must not have any direct contact with the encapsulating resin.
Direct contact with the encapsulating resin may result in internal disconnections causing the LED not to illuminate.
6

7페이지


구       성 총 23 페이지수
다운로드[ NVSW119CT.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
NVSW119CT

LED

NICHIA
NICHIA

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵