|
|
PDF PHR0603 Data sheet ( Hoja de datos )
| Número de pieza | PHR0603 | |
| Descripción | Thin Film Chip Resistors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PHR0603 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.vishay.com
PHR
Vishay Sfernice
ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %),
Thin Film Chip Resistors
Vishay Sfernice Thin Film division holds ESCC QML
qualification (ESCC technology flow qualification).
These High-Rel. components are ideal for low noise and
precision applications, superior stability, low temperature
coefficient of resistance, and low voltage coefficient, Vishay
Sfernice’s precision thin film wraparound resistors exceed
requirements of MIL-PRF-55342G characteristics Y
(± 10 ppm/°C).
FEATURES
• Load life stability at ± 70 °C for 2000 h:
0.15 % under Pn
• Low temperature coefficient down to ± 5 ppm/°C
• Very low noise (< -35 dB) and voltage coefficient
(< 0.01 ppm/V)
• Resistance range: 10 to 3 M (depending on size)
• Laser trimmed tolerances to ± 0.01 %
• TCR in lot tracking 5 ppm/°C
• Termination: Thin film technology
• SnPb terminations over nickel barrier
• ESCC 4001 (generic specifications)
• ESCC 4001/023 (detailed specifications)
• ESCC qualified
• SMD wraparound chip resistor
• Operating temperature range: -65 °C to +155 °C
• From 0402 to 2010
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
ESCC
VARIANT
NUMBER
RESISTANCE
RANGE
RATED
POWER
AT + 70 °C
(Pn)
W (1)
LIMITING
ELEMENT
VOLTAGE
(UL)
V (1)
INSULATION
VOLTAGE
(Ui)
V
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
PHR 0402
PHR 0603
0402 13 and 14
0603 01 and 05
10 to 150K
10 to 500K
0.05
0.1
30
35
50
0.01, 0.02, 0.05, 0.1
5, 10, 25
100
0.01, 0.02, 0.05, 0.1
5, 10, 25
PHR 0805
0805 02 and 06 10 to 750K
0.125
75
200
0.01, 0.02, 0.05, 0.1
5, 10, 25
PHR 1206
PHR 2010
1206 03 and 07
2010 04 and 08
10 to 3.5M
10 to 6M
0.25
0.50
100
150
300
0.01, 0.02, 0.05, 0.1
5, 10, 25
300
0.01, 0.02, 0.05, 0.1
5, 10, 25
Note
(1) Limiting voltages and power rating are already derated (for maximum ratings admissible, refer to P chip: www.vishay.com/cod?53017).
CLIMATIC SPECIFICATIONS
Operating temperature
range
-65 °C; +155 °C
Soldering temperature
(Tsol)
260 °C, immersion 10 s
MECHANICAL SPECIFICATIONS
Substrate material Alumina
Technology
Thin Film
Film
Nickel Chromium with mineral
passivation
Protection
Epoxy and silicone
Terminations
B type: SnPb over nickel barrier
for solder reflow (3)
G type: Gold
Note
(2) For B terminations use recommended reflow profile #1 as per
Application Note “Guidelines for Vishay Sfernice Resistive and
Inductive Components” (document number: 52029)
Revision: 28-Aug-15
1 Document Number: 53037
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
PHR
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
LIMITED TO 18 DIGITS: If more digits are necessary a codification of some digits might be necessary
PHR0 6 0 3 Y 1 0 0 3BBT 0 1 4
TYPE
PHR0402
PHR0603
PHR0805
PHR1206
PHR2010
TCR
Y = ± 10 ppm/°C
E = ± 25 ppm/°C
Z = 5 ppm/°C
(+22 °C; +70 °C)
C = 5 ppm/°C
(-55 °C; +155 °C)
OHMIC
VALUE
The first three digits are
significant figures and the
last digit specifies the
number of zero to follow. R
designates decimal point.
Example:
10R0 = 10
3901 = 3900
1004 = 1 M
Note
• Terminations B: Variants 01 / 02 / 03 / 04 and 13
Terminations G: Variants 05 / 06 / 07 / 08 and 14
TOLERANCE
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.10 %
TERMINATION
B: SnPb over
nickel barrier
G: Gold
PACKAGING
For more
information
see
Codification
of Packaging
table
OPTION
Leave
blank
if no
option
GLOBAL PART NUMBER INFORMATION
ESCC Code
4 0 0 1 0 2 3 0 1 1 0 0 3B1
ESCC SPEC
4001023
VARIANT
13 or 14 = 0402
01 or 05 = 0603
02 or 06 = 0805
03 or 07 = 1206
04 or 08 = 2010
OHMIC
VALUE
The first three digits are
significant figures and the
last digit specifies the
number of zero to follow. R
designates decimal point.
Example:
10R0 = 10
3901 = 3900
1004 = 1 M
TOLERANCE
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.10 %
TCR
1 = ± 10 ppm/°C
0 = ± 5 ppm/°C
(+22 °C; +70 °C)
2 = ± 25 ppm/°C
9 = ± 5 ppm/°C
(-55 °C; +155 °C)
CODIFICATION PACKAGING - Waffle Pack
CODE 18
PACKAGING
W 25 min. (100 min. for size 0402), 1 mult
WA 100 min., 100 mult (1)
CODIFICATION PACKAGING - Plastic Tape (2)
CODE 18
PACKAGING
T 50 min. (100 min. for size 0402), 1 mult
TA 100 min., 100 mult
TB 250 min., 250 mult
TC 500 min., 500 mult
TD 1000 min., 1000 mult
TE 2500 min., 2500 mult
TF Full tape (3)
CODIFICATION PACKAGING - Paper Tape (2)
CODE 18
PACKAGING
PT 100 min., 1 mult
PA 100 min., 100 mult
PB 250 min., 250 mult
PC 500 min., 500 mult
PD 1000 min., 1000 mult
PE 2500 min., 2500 mult
PF Full tape (3)
Notes
(1) Available only in size 1206.
(2) Plastic tape in standard for all sizes except 0402. Paper tape in
standard for size 0402 (option for other sizes. Availability to be
checked with factory).
(3) Qty. depending on size of chips.
Revision: 28-Aug-15
5 Document Number: 53037
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet PHR0603.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PHR0603 | Thin Film Chip Resistors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |