|
|
PDF PHT2010 Data sheet ( Hoja de datos )
| Número de pieza | PHT2010 | |
| Descripción | Thin Film Wraparound Chip Resistors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PHT2010 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.vishay.com
PHT
Vishay Sfernice
High Stability - High Temperature (230 °C)
Thin Film Wraparound Chip Resistors, Sulfur Resistant
INTRODUCTION
For applications such as down hole applications, the need
for parts able to withstand very severe conditions
(temperature as high as 215 °C powered or up to 230 °C
un-powered) has leaded Vishay Sfernice to push out the
limit of the thin film technology.
Designers might read the application note: Power
Dissipation Considerations in High Precision Vishay
Sfernice Thin Film Chip Resistors and Arrays
(P, PRA etc…) (High Temperature Application)
www.vishay.com/doc?53047 in conjunction with this
datasheet to help them to properly design their PCBs and
get the best performances of the PHT.
Vishay Sfernice R&D engineers will be willing to support any
customer design considerations.
FEATURES
• Operating temperature range:
-55 °C; +215 °C
• Storage temperature: -55 °C; +230 °C
• Gold terminations (< 1 μm thick)
• 5 sizes available (0402, 0603, 0805, 1206,
2010); other sizes upon request
• Temperature coefficient down to 15 ppm
(-55 °C; +215 °C)
• Tolerance down to 0.01 %
• Load life stability: 0.35 % max. after 2000 h at 220 °C
(ambient) at Pn
• Shelf life stability: 0.7 % typ. (1 % max.) after 15 000 h at
230 °C
• SMD wraparound
• TCR remains constant after long term storage at 230 °C
(15 000 h)
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE
RATED POWER (1)(2)
P215 °C
W
LIMITING ELEMENT
VOLTAGE
V
TOLERANCE (2)
±%
TEMPERATURE
COEFFICIENT (3)
± ppm/°C
PHT0402
PHT0603
0402
0603
10 to 130K
10 to 320K
0.0189
0.0375
50 0.01, 0.02, 0.05, 0.1, 0.5, 1 10, 15, 25, 30, 50, 55
75 0.01, 0.02, 0.05, 0.1, 0.5, 1 10, 15, 25, 30, 50, 55
PHT0805 0805 10 to 720K
0.06
150 0.01, 0.02, 0.05, 0.1, 0.5, 1 10, 15, 25, 30, 50, 55
PHT1206
PHT2010
1206
2010
10 to 2.7M
10 to 7.5M
0.1
0.2 (4)
200 0.01, 0.02, 0.05, 0.1, 0.5, 1 10, 15, 25, 30, 50, 55
300 0.01, 0.02, 0.05, 0.1, 0.5, 1 10, 15, 25, 30, 50, 55
Notes
(1) For power handling improvement, please refer to application note 53047: “Power Dissipation Considerations in High Precision Vishay
Sfernice Thin Film Chip Resistors and Arrays (High Temperature Applications)” www.vishay.com/doc?/53047 and consult Vishay Sfernice
(2) See Table 2 on next page
(3) See Table 1 on next page
(4) It is possible to dissipate up to 0.3 W, but there will be an additional drift of 0.1 % after load life
CLIMATIC SPECIFICATIONS
Operating temperature range
-55 °C; +215 °C
Storage temperature range
-55 °C; +230 °C
PERFORMANCE VS. HUMID SULFUR VAPOR
Test conditions
50 °C ± 2 °C, 85 % ± 4 % RH,
exposure time 500 h
Test results
Resistance drift < (0.05 % R + 0.05 ),
no corrosion products observed
MECHANICAL SPECIFICATIONS
Substrate
Resistive Element
Alumina
Nichrome (NiCr)
Passivation
Protection
Terminations
Silicon nitride (Si3N4)
Epoxy + silicone
Gold (< 1 μm) over nickel barrier
Note
• For other terminations, please consult
Revision: 14-Jan-15
1 Document Number: 53050
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
PACKAGING
ESD packaging available: waffle-pack and plastic tape and
reel (low conductivity). Paper tape available in standard (for
size 0402) and upon request (ESD only) (for sizes 0603,
0805, and 1206).
NUMBER OF PIECES PER PACKAGE
SIZE MOQ WAFFLE PACK
TAPE AND REEL
TAPE
WIDTH
2" × 2"
MIN. MAX.
0402
0603
0805
1206
100
100
140
5000
8 mm
100
4000
2010
60
2000 8 mm (1)
Note
(1) 12 mm on request
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: PHT1206Y1001BGT063
PHT 1 2 0 6Y
1
PHT
Vishay Sfernice
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code.
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: please consult
Vishay Sfernice for specific ordering code.
0 0 1 BGT 0 6 3
GLOBAL
MODEL
PHT
SIZE
0402
0603
0805
1206
2010
TCR
Y
E
H
VALUE
The first three digits are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
TOLERANCE
L = 0.01 %
P = 0.02 %
W = 0.05 %
B = 0.1 %
D = 0.5 %
F=1%
TERMINATION
G = gold
N = tin/silver (1)
PACKAGING
For more
information see
codification of
Packaging table
OPTION
Leave blank
if no option
Note
(1) For usage at temperatures up to 200 °C maximum N (tin/silver termination are available upon request)
CODIFICATION OF PACKAGING
CODE 18
WAFFLE PACK
W
WA
PLASTIC TAPE (in standard for all sizes except 0402)
T
TA
TB
TC
TD
TE
TF
PAPER TAPE (in standard for 0402, option for other sizes)
PT
PA
PB
PC
PD
PE
PF
PACKAGING
100 min., 1 mult
100 min., 100 mult (available only on size 1206)
100 min., 1 mult
100 min., 100 mult
250 min., 250 mult
500 min., 500 mult
1000 min., 1000 mult
2500min., 2500 mult
Full tape (quantity depending on size of chips)
100 min., 1 mult
100 min., 100 mult
250 min., 250 mult
500 min., 500 mult
1000 min., 1000 mult
2500min., 2500 mult
Full tape (quantity depending on size of chips)
Revision: 14-Jan-15
5 Document Number: 53050
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet PHT2010.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PHT2010 | Thin Film Wraparound Chip Resistors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |