Datasheet.kr   

PR03 데이터시트 PDF




Vishay에서 제조한 전자 부품 PR03은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 PR03 자료 제공

부품번호 PR03 기능
기능 Power Metal Film Leaded Resistors
제조업체 Vishay
로고 Vishay 로고


PR03 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 20 페이지수

미리보기를 사용할 수 없습니다

PR03 데이터시트, 핀배열, 회로
www.vishay.com
PR01, PR02, PR03
Vishay BCcomponents
Power Metal Film Leaded Resistors
FEATURES
• High power in small packages (1 W / 0207 size
to 3 W / 0617 size)
• Defined fusing characteristics
• Technology: metal film
• Meets active and passive flammability
requirements as defined in IEC 60115-1
• AEC-Q200 qualified (PR01 and PR02)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper or copper-clad iron are welded to the end-caps. The
resistors are coated with a red, non-flammable lacquer
which provides electrical, mechanical and climatic
protection. This coating is not resistant to aggressive fluxes
and cleaning solvents. The encapsulation is resistant to all
cleaning solvents in accordance with IEC 60068-2-45.
APPLICATIONS
• All general purpose power applications
• Automotive electronics
• Lighting ballast
TECHNICAL SPECIFICATIONS
DESCRIPTION
PR01
PR02
Cu-lead
PR02
FeCu-lead
PR03
Cu-lead
DIN size
Resistance range (1)
Resistance tolerance (2)
0207
0.22 to 1 M
± 1 %; ± 5 %
0411
0.33 to 1 M
± 1 %; ± 5 %
0411
1 to 1 M
± 1 %; ± 5 %
0617
0.68 to 1 M
± 1 %; ± 5 %
Temperature coefficient
Rated dissipation, P70
1  R
R<1
Thermal resistance (Rth)
Operating voltage, Umax. AC/DC
E-series
Basic specification
Stability after:
Endurance test (1000 h, P70)
Damp heat test (56 days)
Soldering (10 s, 260 °C)
± 250 ppm/K
± 250 ppm/K
± 250 ppm/K
± 250 ppm/K
1W
0.6 W
135 K/W
350 V
2 W 1.3 W 3 W
1.2 W - 1.6 W
75 K/W
115 K/W
60 K/W
500 V
500 V
750 V
E24, E96 (± 1 %); E24 (± 5 %)
IEC 60115-1
R max.: ± (5 % R + 0.1 )
R max.: ± (3 % R + 0.1 )
R max.: ± (1 % R + 0.05 )
Notes
(1) R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method.
(2) 1 % tolerance is available for Rn-range from 1 upwards.
PR03
FeCu-lead
0617
1 to 1 M
± 1 %; ± 5 %
± 250 ppm/K
2.5 W
-
75 K/W
750 V
Revision: 10-Sep-15
1 Document Number: 28729
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




PR03 pdf, 반도체, 판매, 대치품
www.vishay.com
PR01, PR02, PR03
Vishay BCcomponents
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper or copper-clad iron are welded to the end-caps. The
resistors are coated with a red, non-flammable lacquer
conformal coating which provides electrical, mechanical
and climatic protection. This coating is not resistant to
aggressive fluxes and cleaning solvents. The conformal
coating is resistant to all cleaning solvents in accordance
with IEC 60068-2-45.
ASSEMBLY
All products comply with the GADSL (1) and the IEC 62474 (2)
list of legal restrictions on hazardous substances. This
includes full compliance with the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Material categorization: for definitions of compliance please
see www.vishay.com/doc?99912
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (3)
• The Global Automotive Declarable Substance List
(GADSL) (1)
• The REACH regulation (1907/2006/EC) and the related list
of substances with very high concern (SVHC) (4) for its
supply chain
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
Hence the products fully comply with the following
directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous
Substances Directive (RoHS) with amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
APPROVALS
The resistors PR01 and PR02 are approved within the
AEC-Q200 Quality Assessment System for Electronic
Components.
Essentially all tests are carried out in accordance with
IEC 60115-1 specification, category -55 °C / +200 °C /
56 days (rated temperature range: lower category
temperature, upper category temperature; damp heat, long
term, 56 days). The tests are carried out in accordance with
IEC 60068-2-xx.
Test method under standard atmospheric conditions
according to IEC 60068-1, 5.3.
In the Test Procedures and Requirements table, tests and
requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given. In
some instances deviations from the IEC recommendations
were necessary for our method of specifying.
All soldering tests are performed with non activated flux.
RELATED PRODUCTS
For more information on products with higher wattage,
higher pulse load capability and metal oxide film technology,
please refer to the WK/WR datasheet at the link:
www.vishay.com/doc?20128
Notes
(1) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at
www.gadsl.org
(2) EFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
www.digitaleurope.org/SearchResults.aspx?Search=eicta.
All products comply with the IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry.
(3) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474.
(4) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table.
Revision: 10-Sep-15
4 Document Number: 28729
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4페이지










PR03 전자부품, 판매, 대치품
www.vishay.com
ΔT
(K)
120
80
40
0
0 0.2 0.4 0.6 0.8 1.0
P (W)
Ø 0.58 mm Cu-leads
PR01 Hot-spot temperature rise (T) as a function
of dissipated power.
160
ΔT
(K)
120
80
40
0
0 0.4 0.8 1.2 1.6P (W) 2.0
Ø 0.78 mm Cu-leads
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
160
ΔT
(K)
120
80
40
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
P (W)
Ø 0.58 mm FeCu-leads
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
PR01, PR02, PR03
Vishay BCcomponents
ΔT
(K)
120
80
40
0
0 0.2 0.4 0.6 0.8
P (W)
Ø 0.58 mm FeCu-leads
PR01 Hot-spot temperature rise (T) as a function
of dissipated power.
160
ΔT
(K)
120
80
40
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
P (W)
Ø 0.78 mm FeCu-leads
PR02 Hot-spot temperature rise (T) as a function
of dissipated power.
200
ΔT
(K)
160
120
80
40
0
0
Ø 0.58 mm FeCu-leads
1
2 P (W)
PR03 Hot-spot temperature rise (T) as a function
of dissipated power.
Revision: 10-Sep-15
7 Document Number: 28729
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

7페이지


구       성 총 20 페이지수
다운로드[ PR03.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
PR01

Power Metal Film Leaded Resistors

Vishay
Vishay
PR0101

Diode (spec sheet)

American Microsemiconductor
American Microsemiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵