|
|
PDF SQJ460AEP Data sheet ( Hoja de datos )
| Número de pieza | SQJ460AEP | |
| Descripción | Automotive N-Channel MOSFET | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SQJ460AEP (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.vishay.com
SQJ460AEP
Vishay Siliconix
Automotive N-Channel 60 V (D-S) 175 °C MOSFET
PRODUCT SUMMARY
VDS (V)
RDS(on) (Ω) at VGS = 10 V
RDS(on) (Ω) at VGS = 4.5 V
ID (A)
Configuration
Package
60
0.0087
0.0094
32
Single
PowerPAK® SO-8L
PowerPAK® SO-8L Single
FEATURES
• TrenchFET® power MOSFET
• AEC-Q101 qualified d
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
D
6.15 mm
1
Top View
5.13 mm
D
1
2S
3S
4S
G
Bottom View
G
N-Channel MOSFET
S
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
Continuous Drain Current a
Continuous Source Current (Diode Conduction) a
Pulsed Drain Current b
TC = 25 °C
TC = 125 °C
ID
IS
IDM
Single Pulse Avalanche Current
Single Pulse Avalanche Energy
L = 0.1 mH
IAS
EAS
Maximum Power Dissipation b
TC = 25 °C
TC = 125 °C
PD
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature) e, f
TJ, Tstg
LIMIT
60
± 20
64
37
75
256
35
61
83
27
-55 to +175
260
UNIT
V
A
mJ
W
°C
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
LIMIT
UNIT
Junction-to-Ambient
Junction-to-Case (Drain)
PCB Mount c
RthJA
65
°C/W
RthJC
1.8
Notes
a. Package limited.
b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
c. When mounted on 1" square PCB (FR4 material).
d. Parametric verification ongoing.
e. See solder profile (www.vishay.com/doc?73257).The PowerPAK SO-8L is a leadless package. The end of the lead terminal is exposed
copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed
and is not required to ensure adequate bottom side solder interconnection.
f. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components.
S15-1832-Rev. A, 10-Aug-15
1
Document Number: 62914
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
1000
IDM Limited
100 Limited by RDS(on)*
10
1
100 μs
1 ms
10 ms
100 ms
1s, 10s, DC
0.1 BVDSS Limited
0.01
TC = 25 °C
Single Pulse
0.01 0.1 1 10
VDS - Drain-to-Source Voltage (V)
* VGS > minimum VGS at which RDS(on) is specified
Safe Operating Area
100
SQJ460AEP
Vishay Siliconix
2
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
0.01
10-4
10-3
Single Pulse
10-2
10-1
1
Square Wave Pulse Duration (s)
Notes:
PDM
t1
t2
1. Duty Cycle, D =
t1
t2
2. Per Unit Base = R thJA = 65 °C/W
3. T JM - TA = PDMZthJA(t)
4. Surface Mounted
10 100 600
Normalized Thermal Transient Impedance, Junction-to-Ambient
S15-1832-Rev. A, 10-Aug-15
5
Document Number: 62914
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page 
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SQJ460AEP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SQJ460AEP | Automotive N-Channel MOSFET | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |