|
|
Número de pieza | SKY77643-11 | |
Descripción | Multimode Multiband Power Amplifier Module | |
Fabricantes | Skyworks Solutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SKY77643-11 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
No Preview Available ! PRELIMINARY DATA SHEET
SKY77643-11 Multimode Multiband Power Amplifier Module
Applications
• Multiband 3G / LTE handsets
• WCDMA Bands I, II, III, IV, V, VIII, IX
• TD-SCDMA Bands 34, 39
• FDD LTE Bands
1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 17, 20, 28, 30
• TDD LTE Band 38, 39, 40, 41
Features
• Hybrid PA architecture
• Two T/R (RX) ports and 14 outputs
• Industry-leading PAE for 3G/4G
• Optimized for APT DCDC operation
• Fully programmable Mobile Industry
Processor Interface (MIPI) control
• MIPI programmable bias modes optimize
best efficiency / linearity trade-off for 3G
and 4G; minimizes DG09 for 3G.
• Small, low profile package:
- 4.0 mm x 6.8 mm x 0.8 mm, Max.
- 42-pad configuration
Description
Skyworks SKY77643-11 is a hybrid multimode multiband (MMMB) Power Amplifier
Module (PAM) that supports 3G / 4G handsets and operates efficiently in WCDMA,
TD-SCDMA, and LTE modes. The module is fully programmable through a Mobile
Industry Processor Interface (MIPI®).
The PAM consists of a WCDMA / LTE block for low, high, and mid-bands, and a Multi-
Function Control (MFC) block, RF input/output ports internally matched to 50 Ω to
reduce the number of external components. A CMOS integrated circuit uses standard
MIPI controls to provide the internal MFC interface and operation. Extremely low
leakage current maximizes handset standby time.
The InGaP die and the silicon die and passive components are mounted on a multi-
layer laminate substrate. The assembly is encapsulated in a 4.0 mm x 6.8 mm x 0.8
mm, 42-pad MCM, SMT package which allows for a highly manufacturable, low cost
solution.
3G: The SKY77643-11 supports WCDMA, High-Speed Downlink Packet Access
(HSDPA), High Speed Uplink Packet Access (HSUPA), High Speed Packet Access
(HSPA+), and TD-SCDMA modulations. Varying the input power level provides output
power control. VCC is adjusted using a DCDC converter to maximize efficiency for each
power level and modulation type.
4G: The SKY77643-11 supports 1.4, 3, 5, 10, 15, 20 MHz channel bandwidths.
Similar to 3G operation, output power is controlled by varying the input power and VCC
is adjusted using a DCDC converter to maximize efficiency for each power level.
3G / 4G Modulation scheme includes:
- WCDMA Voice Release 99
- HSDPA categories
- HSUPA
- HSPA+
- TD-SCDMA
- LTE 1.4, 3, 5, 10, 15, 20 MHz Channel BW
- TDD-LTE
Skyworks Solutions, Inc. • Phone [781] 376–3000 • Fax [781] 376–3100 • [email protected] • www.skyworksinc.com
203324B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • October 16, 2014
1
1 page SKY77643-11 MULTIMODE / MULTIBAND POWER AMPLIFIER MODULE
PRELIMINARY DATA SHEET
TABLE 3. MIPI RFFE STANDARD REGISTER MAP (2 OF 3)
Register 2, Address: 0x02 (SWITCH_CTRL)
Register 2
[7:4]
[3:0]
Description
Band Switch Control Mode
Default
Notes
0000 Control Mode
0000 = Switch Off (Standby)
0001 = High Isolation
0010 = LB1_TX
0011 = LB2_TX
0100 = LB3_TX
0101 = LB4_TX
0110 = LB5_TX
0111 = High Isolation
1000 = High Isolation
1001 = High Isolation
1010 = MB1_TX
1011 = MB2_TX
1100 = MB3_TX
1101 = MB4_TX
1110 = MB5_TX
1111 = High Isolation
0000 Control Mode
0000 = Switch Off (Standby)
0111 = B7_Rx
1000 = B7_Tx
1001 = B40_Tx
1010 = B38_Tx
1011 = B41_Tx
1100 = B40_Rx
1101 = B38_Rx
1110 = B41_Rx
1111 = High Isolation
Rest = High Isolation
Register 3, Address: 0x03 (BIAS_CTRL)
Register 3
Description
Default
Notes
[7:4] Enable Boost Bias Current 0 Boost Bias Enable
1 = Boost bias enabled
[6:4]
Spare
000
[3:0] Boost Bias Current Reference 0000 0000 = Disable
0001 = 0.200 mA 0110 = 0.575 mA
0010 = 0.275 mA 0111 = 0.650 mA
0011 = 0.350 mA 1000 = 0.725 mA
0100 = 0.425 mA 1001 = 0.800 mA
0101 = 0.500 mA 1010 = 0.875 mA
1011 = 0.950 mA
1100 = 1.025 mA
1101 = 1.100 mA
1110 = 1.175 mA
1111 = 1.250 mA
Skyworks Solutions, Inc. • Phone [781] 376–3000 • Fax [781] 376–3100 • [email protected] • www.skyworksinc.com
203324B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • October 16, 2014
5
5 Page SKY77643-11 MULTIMODE / MULTIBAND POWER AMPLIFIER MODULE
PRELIMINARY DATA SHEET
TABLE 8. SKY77643-11 ELECTRICAL SPECIFICATIONS FOR NOMINAL OPERATING CONDITIONS – TDD BAND 41, TDD AXGP BAND
UNLESS OTHERWISE SPECIFIED: VBATT = 3.4 V; TCASE = +25 °C; LTE SIGNAL = QPSK/10 MHZ/12RB FOR MPR = 0 AND QPSK/20 MHZ/100 RB FOR MPR = 1.
Parameter
Symbol
Condition
Minimum Typical Maximum Unit
Operating Frequency
Maximum Output Power
Gain
Power Added Efficiency2
Total Supply Current3
Adjacent Channel Leakage power Ratio4
Harmonics
Tx Noise in Rx Bands
EVM
Turn On Time
Turn Off Time
Input Voltage Standing Wave Ratio
Stability
Ruggedness
ƒ0
POUT_MAX
POUT_MAX_ETC
GHIGH
GHIGH_ETC
GLOW
PAEAPT
I_TOT_MAX
EUTRA
EUTRA_ACLR1
UTRA1
UTRA_ACLR1
UTRA2
UTRA_ACLR2
Second
2ƒ0
Third to Fifth 3ƒ0–5ƒ0
GPS Rx PNRX_GPS
BT, WLAN PNRX_BT
EVM
TON
TOFF
VSWR
S
Ru
MPR = 01
VBATT = 3.1 V to 4.6 V,
VCC1 = VCC2 = 3.1 V,
TCASE = TRANGE
POUT = POUT_MAX
TCASE = +25 °C
VBATT = 3.1 V to 4.6 V,
VCC1 = VCC2 = 3.1 V,
POUT = POUT_MAX
TCASE = TRANGE
VCC = 0.55 V, POUT = 3 dBm
POUT = POUT_MAX
POUT = POUT_MAX, VBATT = 3.8 V
POUT ≤ (POUT_MAX – MPR1)
2496
28.0
27.5
27.5
26.0
POUT ≤ POUT_MAX
1574 MHz–1577 MHz5
2400 MHz–2452 MHz5
POUT ≤ POUT_MAX,
TRANGE, VBATT = 3.1 V to 4.6 V,
Load = 50 ohms
Gain settled to within
POUT_MAX – 0.5 dB
Gain settled to below
POUT_MAX – 30 dB
POUT ≤ POUT_MAX
No oscillations,
all spurious < –36 dBm,
POUT ≤ POUT_MAX,
VBATT = 3.1 V to 4.6 V,
TCASE = TRANGE
No permanent damage to module
POUT ≤ POUT_MAX,
VBATT = 3.1 V to 4.6 V,
TCASE = TRANGE
6:1
10:1
2595
29.5
15.0
31
560
–38
–40
–42
3
1.8:1
2690 MHz
dBm
31.5 dB
20.0
%
mA
–35 dBc
–38
–41
–15 dBm
–15
–140 dBm/Hz
–104
5%
5 µs
5 µs
VSWR
VSWR
1 MPR is the maximum power reduction as defined in 3GPP TS36.101
2 VCC optimized for ACLR1_UTRA = –40 dBc.
3 I_TOT = IBATT + (ICC1 + ICC2)(VCC/VBATT)(1/DC_DC_EFF). See Table 18
4 ACLR1_EUTRA Max = –33, ACLR1_UTRA Max = –35, ACLR2_UTRA Max = –39 for ETC.
5 Measured with 20 MHz/100RB LTE Waveform.
Skyworks Solutions, Inc. • Phone [781] 376–3000 • Fax [781] 376–3100 • [email protected] • www.skyworksinc.com
203324B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • October 16, 2014
11
11 Page |
Páginas | Total 29 Páginas | |
PDF Descargar | [ Datasheet SKY77643-11.PDF ] |
Número de pieza | Descripción | Fabricantes |
SKY77643-11 | Multimode Multiband Power Amplifier Module | Skyworks Solutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |