Datasheet.kr   

VS-300UR40AM 데이터시트 PDF




Vishay에서 제조한 전자 부품 VS-300UR40AM은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 VS-300UR40AM 자료 제공

부품번호 VS-300UR40AM 기능
기능 Standard Recovery Diodes
제조업체 Vishay
로고 Vishay 로고


VS-300UR40AM 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

VS-300UR40AM 데이터시트, 핀배열, 회로
www.vishay.com
VS-300U(R) Series
Vishay Semiconductors
Standard Recovery Diodes
(Stud Version), 300 A
DO-205AB (DO-9)
PRODUCT SUMMARY
IF(AV)
Package
Circuit configuration
300 A
DO-205AB (DO-9)
Single diode
FEATURES
• Alloy diode
• Popular series for rough service
• Stud cathode and stud anode version
• Designed and qualified for industrial level
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
• Welders
• Power supplies
• Motor controls
• Battery chargers
• General industrial current rectification
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IF(AV)
IFSM
I2t
VRRM
TJ
TC
50 Hz
60 Hz
50 Hz
60 Hz
Range
VALUES
300
150
6550
6850
214
195
400
-65 to 200
UNITS
A
°C
A
kA2s
V
°C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VOLTAGE
CODE
VS-300U(R)..
40
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
400
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
500
IRRM MAXIMUM
AT TJ = 175 °C
mA
40
Revision: 25-Nov-13
1 Document Number: 93508
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




VS-300UR40AM pdf, 반도체, 판매, 대치품
www.vishay.com
6000
5500
5000
4500
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 200°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
4000
3500
3000
2500
2000 300U40AM20
1500
1
10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
10000
VS-300U(R) Series
Vishay Semiconductors
7000
6500
6000
5500
5000
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
Initial Tj = 200°C
No Voltage Reapplied
Rated Vrrm Reapplied
4500
4000
3500
3000
2500
2000 300U40AM20
1500
0.01
0.1
Pulse Train Duration (s)
1
Fig. 6 - Maximum Non-Repetitive Surge Current
1000
Tj = 25°C
100 Tj = 200°C
300U40AM20
10
0 0.5 1 1.5 2 2.5 3
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
1
Steady State Value
RthJC = 0.18 K/W
0.1 (DC Operation)
0.01
0.001
0.0001
300U40AM20
0.001
0.01 0.1
Square Wave Pulse Duration (s)
1
Fig. 8 - Thermal Impedance ZthJC Characteristic
10
Revision: 25-Nov-13
4 Document Number: 93508
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4페이지










VS-300UR40AM 전자부품, 판매, 대치품
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

7페이지


구       성 총 7 페이지수
다운로드[ VS-300UR40AM.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
VS-300UR40A

Standard Recovery Diodes

Vishay
Vishay
VS-300UR40AM

Standard Recovery Diodes

Vishay
Vishay

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵