|
|
PDF XP1035-QH Data sheet ( Hoja de datos )
| Número de pieza | XP1035-QH | |
| Descripción | Linear Power Amplifier | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XP1035-QH (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
5.9-9.5 GHz Linear Power Amplifier
QFN, 4x4mm
February 2010 - Rev 17-Feb-10
Features
26 dB Small Signal Gain
39 dBm Third Order Intercept Point (OIP3)
Integrated Power Detector
4x4mm QFN Package, RoHS Compliant
100% RF Testing
P1035-QH
General Description
The XP1035-QH is a packaged linear power amplifier
that operates over the 5.9-9.5 GHz frequency band.The
device provides 26 dB gain and 39 dBm Output Third
Order Intercept Point (OIP3) across the band and is
offered in an industry standard, fully molded 4x4mm
QFN package.The packaged amplifier is comprised of
a three stage power amplifier with an integrated,
temperature compensated on-chip power detector.
The device includes on-chip ESD protection structures
and DC by-pass capacitors to ease the implementation
and volume assembly of the packaged part.The device
is manufactured in GaAs PHEMT device technology
with BCB wafer coating to enhance ruggedness and
repeatability of performance.The XP1035-QH is well
suited for Point-to-Point Radio, LMDS, SATCOM and
VSAT applications.
Absolute Maximum Ratings1
Supply Voltage (Vd1,2,3) +7.2V
Supply Current (Id1,2,3)
600 mA
Gate Bias Voltage (Vg1,2,3) -3V
Max Power Dissipation (Pdiss) 4.2W
RF Input Power
+15 dBm
Operating Temperature (Ta) -55 to +85 ºC
Storage Temperature (Tstg) -65 to +165 ºC
Channel Temperature (Tch)2 150 ºC
MSL Level (MSL)
MSL3
(1) Operation of this device above any one of these parameters
may cause permanent damage.
(2) Channel temperature directly affects a device’s MTTF.
Channel temperature should be kept as low as possible to
maximize lifetime.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Frequency Range (f )
Small Signal Gain (S21)
Input Return Loss (S11)
Output Return Loss (S22)
Reverse Isolation (S12)
Psat
P1dB
OIP3
Drain Bias Voltage (Vd1,2,3)
Detector Bias Voltage (Vdet,ref )
Gate Bias Voltage (Vg1,2,3)
Supply Current (Id1)
Supply Current (Id2)
Supply Current (Id3)
Units Min. Typ. Max.
GHz 5.9 - 9.5
dB 26
dB 13
dB 10
dB 45
dBm 29
dBm 27.5
dBm 39
VDC 6
VDC 5
VDC -2
-1
mA 70
mA 140
mA 280
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
5.9-9.5 GHz Linear Power Amplifier
QFN, 4x4mm
February 2010 - Rev 17-Feb-10
P1035-QH
App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 5.0V with 70, 140, 280mA respectively.
It is recommended to use active bias to keep the currents constant in order to maintain the best performance over temperature. Depending on the
supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with
a low value resistor in series with the drain supply used to sense the current.The gate of the pHEMT is controlled to maintain correct drain current
and thus drain voltage.The typical gate voltage needed to do this is -1.0V. Make sure to sequence the applied voltage to ensure negative gate bias
is available before applying the positive drain supply.
App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as
possible, with additional 10µF decoupling caps.
MTTF Graphs
XP1035-QH-0G00: MTTF (hours) vs. Package Base Temperature
Vdd = 6.0 V, Idd = 500 mA
1.0E+14
1.0E+13
1.0E+12
1.0E+11
1.0E+10
1.0E+09
1.0E+08
1.0E+07
1.0E+06
1.0E+05
20 30 40 50 60 70 80 90 100 110 120
Package Base Temp (ºC)
XP1035-QH-0G00: MTTF (hours) vs. Package Base Temperature
Vdd = 6.0 V, Idd = 500 mA
200
175
150
125
100
75
50
20 30 40 50 60 70 80 90 100 110 120
Package Base Temp (ºC)
XP1035-QH-0G00: Rth vs. Package Base Temperature
Vdd = 6.0 V, Idd = 500 mA
24
22
20
18
16
14
12
10
8
6
4
2
0
20 30 40 50 60 70 80 90 100 110 120
Package Base Temp (ºC)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 7
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet XP1035-QH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XP1035-QH | Power Amplifier |  MA-COM |
| XP1035-QH | Linear Power Amplifier | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |