A27020 - 256K X 8 OTP CMOS EPROM

AMIC Technology에서 제조한 전자 부품 A27020은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.

A27020의 기능 및 특징 중 하나는 "256K X 8 OTP CMOS EPROM" 입니다.

PDF 형식의 A27020 자료 제공

A27020 기능

256K X 8 OTP CMOS EPROM

AMIC Technology

A27020 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

PDF 파일안의 텍스트 미리보기

A27020 Series Preliminary Document Title 256K X 8 OTP CMOS EPROM Revision History Rev. No. 0.0 256K X 8 OTP CMOS EPROM History Initial issue Issue Date August 2, 2002 Remark Preliminary PRELIMINARY (August, 2002, Version 0.0) AMIC Technology, Inc. A27020 Series Preliminary Features n n n n 262,144 X 8 bit organization Programming voltage: 12.75V Access time: 55/70 ns (max.) Current: Operating: 30mA (max.) at 5MHz Standby: 100µA (max.) n All inputs and outputs are directly TTL-compatible n Available in 32-pin DIP and 32-pin PLCC packages 256K X 8 OTP CMOS EPROM General Description The A27020 chip is a high-performance 2,097,152 bit one-time p

Contents of page 4 out of 14 pages :

A27020 Series Functional Description Read Mode The A27020 has two control functions, both of which must be logically active in order to obtain data at the outputs. CE is the power control and should be used for device selection. OE is the output control and should be used to data to the output pins, which is independent of device selection. Assuming that addresses are stable, address access time (tAA) is equal to the delay from CE to output (tCE). Data is available at the output after a delay (tOE) from the falling edge of OE , as long as CE has been low and the addresses have been stable for at least tACC - tOE. Standby Mode The A27020 has a standby mode which reduces the active current from 30mA to 100µA. The A27020 is placed in the standby mode by applying a CMOS high signal to CE . When in the standby mode, the output are in a high impedance state, independent of the OE . The auto identify mode allows the reading out of a binary code from a EPROM that will identify its manufacturer and type. This mode is intended for use by programming equipment for the purpose of automatically matching the device to be programmed with its corresponding programming algorithm. To activate the mode, the programming equipment must apply 12.0V ± 0.5V

PDF 파일 전체 : 14 페이지중 1, 2페이지 미리보기

[ A27020.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는

부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.

A27020 데이터시트 PDF

PDF 형식의 A27020 자료 제공

PDF 파일안의 텍스트 미리보기

관련 데이터시트

부품번호	상세설명 및 기능	제조사
A27020	256K X 8 OTP CMOS EPROM	AMIC Technology
A27020-55	256K X 8 OTP CMOS EPROM	AMIC Technology