AN231E04 - Dynamically Reconfigurable dpASP

anadigm에서 제조한 전자 부품 AN231E04은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.

AN231E04의 기능 및 특징 중 하나는 "Dynamically Reconfigurable dpASP" 입니다.

PDF 형식의 AN231E04 자료 제공

AN231E04 기능

Dynamically Reconfigurable dpASP

anadigm

AN231E04 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

PDF 파일안의 텍스트 미리보기

AN231E04 Datasheet Rev 1.0 3rd Generation Dynamically Reconfigurable dpASP This device is RoHS compliant www.anadigm.com DS231000-U001d -1- Disclaimer Anadigm reserves the right to make any changes without further notice to any products herein. Anadigm makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Anadigm assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including with out limitation consequential or incidental damages. "Typical" parameters can

Contents of page 4 out of 24 pages :

www.DataSheet4U.com AN231E04 Datasheet – Dynamically Reconfigurable dpASP 1 ELECTRICAL CHARACTERISTICS 1.1 Absolute Maximum Ratings Parameter Symbol Min Typ Max Unit Comment DC Power Supplies a AVDD BVDD DVDD -0.5 - 3.6 V V AVSS, BVSS and DVSS all held to 0.0 V xVDD to yVDD Offset -0.5 0.5 V Ideally all supplies should be at the same voltage (Theoretical values based on Package Power Dissipation, Pmax 25°C Pmax 85°C - - 4.5 1.8 Tj=125deg.C) W Still air, No heatsink, 44 pads and exposed die pad soldered to PCB θja = 22.5°C/W. VDD = 3.3V AN231E04 max power dissipation dpASPmax - Maximum power dissipation all - 0.25 W resources used, (see section 1.5.13 for more detail). Input Voltage Vinmax VSS-0.5 - VDD+0.5 V Ambient Operating Temperature Top -40 - 85 °C Storage Temperature Tstg -40 125 °C a Absolute Maximum DC Power Supply Rating - The failure mode is non-catastrophic for VDD of up to 5 volts, but will cause reduced operating life time. The additional stress caused by higher local electric fields within the CMOS circuitry may induce metal migration, oxide leakage and other time/quality related issues. 1.2 Recommended Operating Conditions Parameter DC Power Supplies Analog Input Voltage. Digital Input Voltage Junction Temp b Symbol Min Typ Max Unit Comment AVDD BVDD DVDD 3.0 3.3 3.6 V AVSS, BVSS and DVSS all held to 0 V Conditional on the circuit which is being driven. This limit is defined Vina VMR -1.375 - VMR +1.375 as maximum signal amplitude V through input Sample and hold cell which results in >-80dB THD+N using a 1KHz test signal. VMR is 1.5 volts above AVSS Vind 0 - DVDD V Tj -40 - 125 °C Assume a package θja=22.5°C/W b To calculate the junction

PDF 파일 전체 : 24 페이지중 1, 2페이지 미리보기

[ AN231E04.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는

부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.

AN231E04 데이터시트 PDF

PDF 형식의 AN231E04 자료 제공

PDF 파일안의 텍스트 미리보기

관련 데이터시트

부품번호	상세설명 및 기능	제조사
AN231E04	Dynamically Reconfigurable dpASP	anadigm