NTB18N06L 데이터시트 PDF

ON Semiconductor에서 제조한 전자 부품 NTB18N06L은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.

NTB18N06L의 기능 및 특징 중 하나는 "Power MOSFET ( Transistor )" 입니다.

PDF 형식의 NTB18N06L 자료 제공

NTB18N06L 기능
Power MOSFET ( Transistor )
ON Semiconductor
ON Semiconductor 로고 

NTB18N06L 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

PDF 파일안의 텍스트 미리보기

NTP18N06L, NTB18N06L Power MOSFET 15 Amps, 60 Volts, Logic Level N−Channel TO−220 and D2PAK Designed for low voltage, high speed switching applications in power supplies, converters and power motor controls and bridge circuits. Typical Applications http://onsemi.com • • • • Power Supplies Converters Power Motor Controls Bridge Circuits 15 AMPERES 60 VOLTS RDS(on) = 100 mW N−Channel D MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Drain−to−Source Voltage Drain−to−Gate Voltage (RGS = 10 mW) Gate−to−Source Voltage − Continuous − Non−Repetitive (tp v 10 ms) Drain Current − Continuous @

Contents of page 4 out of 12 pages :

NTP18N06L, NTB18N06L POWER MOSFET SWITCHING Switching behavior is most easily modeled and predicted by recognizing that the power MOSFET is charge controlled. The lengths of various switching intervals (Dt) are determined by how fast the FET input capacitance can be charged by current from the generator. The published capacitance data is difficult to use for calculating rise and fall because drain−gate capacitance varies greatly with applied voltage. Accordingly, gate charge data is used. In most cases, a satisfactory estimate of average input current (IG(AV)) can be made from a rudimentary analysis of the drive circuit so that t = Q/IG(AV) During the rise and fall time interval when switching a resistive load, VGS remains virtually constant at a level known as the plateau voltage, VSGP. Therefore, rise and fall times may be approximated by the following: tr = Q2 x RG/(VGG − VGSP) tf = Q2 x RG/VGSP where VGG = the gate drive voltage, which varies from zero to VGG RG = the gate drive resistance and Q2 and VGSP are read from the gate charge curve. During the turn−on and turn−off delay times, gate current is not constant. The simplest calculation uses appropriate values from the capacitance curves in a standard equation for voltage change in an RC network. The equations are: The capacitance (Ciss) is read from the capacitance curve at a voltage corresponding to the

PDF 파일 전체 : 12 페이지중 1, 2페이지 미리보기
NTB18N06L datasheet
NTB18N06L pinouts
[ NTB18N06L.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는

부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.

관련 데이터시트

부품번호상세설명 및 기능제조사

Power MOSFET ( Transistor )

ON Semiconductor
ON Semiconductor

Power MOSFET ( Transistor )

ON Semiconductor
ON Semiconductor

우리는 플랫폼을 지속적으로 개선하고 새로운 기능을 추가하여 사용자 경험을 향상시키기 위해 최선을 다하고 있습니다.

DataSheet.kr    |   2020   |  연락처  

|  링크모음   |   검색  |   사이트맵