SPE1211 데이터시트 PDF

SYNC POWER에서 제조한 전자 부품 SPE1211은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.

SPE1211의 기능 및 특징 중 하나는 "Single-Line ESD Protection Array" 입니다.

PDF 형식의 SPE1211 자료 제공

SPE1211 기능
Single-Line ESD Protection Array

SPE1211 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

PDF 파일안의 텍스트 미리보기

SPE1211 Single-Line ESD Protection Array DESCRIPTION The SPE1211 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE1211 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE1211 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE1211 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOD-523 package makes them ideal for use in por

Contents of page 4 out of 6 pages :

SPE1211 Single-Line ESD Protection Array APPLICATION NOTE Device Connection Options Circuit Diagram These TVS diodes are designed to protect one data, I/O, or power supply line. The device is unidirectional and may be used on lines where the signal polarity is above ground. The cathode band should be placed towards the line that is to be protected. Circuit Board Layout Recommendations for Suppression of ESD. Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are recommended: ★ Place the TVS near the input terminals or connectors to restrict transient coupling. ★ Minimize the path length between the TVS and the protected line. ★ Minimize all conductive loops including power and ground loops. ★ The ESD transient return path to ground should be kept as short as possible. ★ Never run critical signals near board edges. ★ Use ground planes whenever possible. Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 100% tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are

PDF 파일 전체 : 6 페이지중 1, 2페이지 미리보기
SPE1211 datasheet
SPE1211 pinouts
[ SPE1211.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는

부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.

관련 데이터시트

부품번호상세설명 및 기능제조사

Single-Line ESD Protection Array


2-Line ESD Protection Array


우리는 플랫폼을 지속적으로 개선하고 새로운 기능을 추가하여 사용자 경험을 향상시키기 위해 최선을 다하고 있습니다.

DataSheet.kr    |   2020   |  연락처  

|  링크모음   |   검색  |   사이트맵