AM1L-0509SH30-N 데이터시트 PDF

AimTEC에서 제조한 전자 부품 AM1L-0509SH30-N은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.

AM1L-0509SH30-N의 기능 및 특징 중 하나는 "1 Watt DC-DC Converter" 입니다.

PDF 형식의 AM1L-0509SH30-N 자료 제공

AM1L-0509SH30-N 기능
1 Watt DC-DC Converter
AimTEC 로고 

AM1L-0509SH30-N 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.

PDF 파일안의 텍스트 미리보기

AM1L-N Series 1 watt dc-dc converters • SMD PACKAGE • LOW RIPPLE & NOISE • HIGH EFFICIENCY UP TO 75% • UL94-VO PACKAGE • INPUT/OUTPUT ISOLATION: 1000 & 3000VDC • OPERATING TEMPERATURE: -40°C ... +85°C • PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS DC-DC CONVERTERS GENERAL DESCRIPTION The AM1L-N series is a family of cost effective 1W single Thirty two models operate from input voltages of 5 & 12 and dual output DC-DC converters. These converters VDC with producing output voltage levels of 5, 9, 12, 15, combines a miniature SMD package with 1000 & ±5, ±9, ±12, ±15VDC. Full SMD-design and a 100% pro- 3000VD

Contents of page 4 out of 4 pages : TYPICAL CHARACTERISTICS AM1L-N Series APPLICATION NOTE General Application Requirement On Output Load In regular circuits, our company’s DC/DC converters may be used directly To ensure this module can operate efficiently and reliably, a minimum load without any peripheral components (see Figure 2). The basic input/output et4U.comisolation may be used to provide a group of simple isolated polar output is specified for this kind of DC/DC converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input power supplies or to generate power supply lines of different voltages. voltage is not exceeded, the minimum output load is not less than 10% of Voltage And Polarity Inversion!u!o!llmIflothaed,aacntudalthoauttpthuitspporwoedrucist should never be operated very small, please connect under no a resistor A key performance of this DC/DC converter is high electric isolation with proper resistance at the output end in parallel to increase the load. capability. Thus, only one DC/DC converter may allow for several potential differences in the layout of circuit board. If necessary, you may Overload Protection connect the output end of the positive to input ground, then the negative Under normal operating conditions, the output circuit of these products output end will generate a negative voltage (see Figure 1). has no protection against over-current and short-circuits. The simplest Filtering In some circuits which are sensitive to noise

PDF 파일 전체 : 4 페이지중 1, 2페이지 미리보기
AM1L-0509SH30-N datasheet
AM1L-0509SH30-N pinouts
[ AM1L-0509SH30-N.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는

부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.

관련 데이터시트

부품번호상세설명 및 기능제조사

1 Watt DC-DC Converter


우리는 플랫폼을 지속적으로 개선하고 새로운 기능을 추가하여 사용자 경험을 향상시키기 위해 최선을 다하고 있습니다.    |   2020   |  연락처  

|  링크모음   |   검색  |   사이트맵