Datasheet WSH520 Equivalent ( PDF )

N.º	Número de pieza	Descripción	Fabricantes	Category
1	WSH520	Low voltage Single Coil Hall Effect IC with Complementary Output Drivers WSH520 Low voltage Single Coil Hall Effect IC with Complementary Output Drivers Features: Operate from 1.8V to 4.5V supply voltage. On-chip Hall sensor. Internal thermal compensation circuit enable operation in a wide range temperature without loss of sensitivity. Output sinking	Winson Semiconductor	driver

WSH Datasheet ( Hoja de datos ) - resultados coincidentes

N.º	Número de pieza	Descripción	Fabricantes	Catagory
1	WSH1132	Unipolar Hall Effect Switch IC WSH1132 Unipolar Hall Effect Switch IC Features: z Operates from 2.4V to 20V supply voltage z Operates with magnetic fields from DC to 15kHz z On-chip Hall Sensor and pull-high resistor z On-chip temperature compensation circuitry minimizes shifts in on and off points and hysteresis over temperature	Winson Semiconductor	data
2	WSH130	Hall Effect Sensor IC WSH130 Operates from 2.4V to 26V supply voltage with reverse voltage protection Operates with magnetic fields from DC to 15kHz On-chip Hall Sensor On-chip temperature compensation circuitry minimizes shifts in on and off points and hysteresis over temperature and supply voltage	Winson Semiconductor	sensor
3	WSH130NL	Unipolar Hall Effect Switch IC WSH130NL Operates from 2.4V to 26V supply voltage with reverse voltage protection Operates with magnetic fields from DC to 15kHz On-chip Hall Sensor On-chip temperature compensation circuitry minimizes shifts in on and off points and hysteresis over temperature and supply volta	Winson Semiconductor	data
4	WSH131	Omnipolar Hall Effect Switch IC WSH131 Omnipolar Hall Effect Switch IC Features: z Operates from 2.4V to 26V supply voltage z Operation with North or South Pole z On-chip Hall Sensor and driver z On-chip temperature compensation circuitry minimizes shifts in On/Off points temperature and supply voltage z On-chip voltage regulator	Winson Semiconductor	data
5	WSH133	Bipolar Hall Effect Switch IC WSH133 Bipolar Hall Effect Switch IC with built-in pull high resistor Features: z Operates from 2.4V to 24V supply voltage z Operates with magnetic fields from DC to 15kHz z On-chip Hall Sensor and 25kΩ pull-high resistor z On-chip temperature compensation circuitry minimizes shifts in on and off	Winson Semiconductor	data
6	WSH134	Unipolar Hall Effect Switch IC WSH134 Unipolar Hall Effect Switch IC Features: z Operates from 2.4V to 26V supply voltage with reverse voltage protection z Operates with magnetic fields from DC to 15kHz z On-chip Hall Sensor z On-chip temperature compensation circuitry minimizes shifts in on and off points and hysteresis over te	Winson Semiconductor	data
7	WSH135	Linear Hall Effect Sensor IC WSH135 Features: Wide operating range 3.0~12V, -20 ~8 Flat Response to 23kHz Low noise output Wide sensible magnetic field range on different supplied voltage ±1,500 Guass on 5V supplied voltage ±4,500 Guass on 12V supplied voltage. Low operating current 3mA Two package style	Winson Semiconductor	sensor

Esta página es del resultado de búsqueda del WSH520. Si pulsa el resultado de búsqueda de WSH520 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.

nuevas actualizaciones

Número de pieza	Descripción	Fabricantes	PDF
SPS122	Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.	Sanken	PDF

DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap